LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 900|回复: 9

安装mplayer不成功

[复制链接]
发表于 2003-7-13 14:54:22 | 显示全部楼层 |阅读模式
[root@board Video]# rpm -Uvh mplayer-common-0.90-1.i386.rpm mplayer-gui-0.90-1.i386.rpm mplayer-skin-default-1.0-2.noarch.rpm
error: failed dependencies:
        libpng.so.2   is needed by mplayer-gui-0.90-1


  libpng.so.2是个什么文件啊?
发表于 2003-7-13 23:35:37 | 显示全部楼层
搜索,然后安装
我觉得安装mplayer还是用源码包自己编译好很多
我在mdk9.1下用源码包安装很顺利
发表于 2003-7-13 23:44:34 | 显示全部楼层

~~

依赖库
发表于 2003-7-14 03:34:25 | 显示全部楼层
源码的快过rpm的吗?还是有什么其他好处?我一直用rpm安mplayer,其实应该没有什么太大的差别吧?
发表于 2003-7-14 06:17:07 | 显示全部楼层

本版的ftp有的下

你用的是别人在redhat上编译的rpm
源码包编译当然不如Mandrake带的好
可能会有很多编译选项你没有打开。
发表于 2003-7-14 12:40:46 | 显示全部楼层
发表于 2003-7-14 21:39:00 | 显示全部楼层

回复: 本版的ftp有的下

最初由 euboy 发表
你用的是别人在redhat上编译的rpm
源码包编译当然不如Mandrake带的好
可能会有很多编译选项你没有打开。

我认为还是自己编译好,我用自带的有些windows下的格式播放不了
比如asf,自己编译后,windwos下的格式几乎都能播放
 楼主| 发表于 2003-7-14 22:56:40 | 显示全部楼层
大连天空
你的ftp是不是不定时开放?我昨天连了好多次都连不上
 楼主| 发表于 2003-7-15 11:31:31 | 显示全部楼层
我下载ftp://linux@mandrake.daliansky.net/Mandrake Software/Mplayer090/   里面的所有文件,安装上以后不能播放视频文件
[root@board Mplayer090]# mplayer /home/board/mnt/NONE-BAOBAO/F/guess/guess0712-1.rm
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale


MPlayer 0.90-3.2.2 (C) 2000-2003 Arpad Gereoffy (see DOCS)

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 6)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 50 audio & 136 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf : No such file or directory
Input config file /etc/mplayer/input.conf parsed : 52 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.

Playing /home/board/mnt/NONE-BAOBAO/F/guess/guess0712-1.rm
Cache fill: 16.50% (1384448 bytes)    REAL file format detected.
skip_str: 12 bytes skipped
skip_str: 20 bytes skipped
======= WAVE Format =======
Format Tag: 28515 (0x6F63)
Channels: 1
Samplerate: 22050
avg byte/sec: 16192
Block align: 564
bits/sample: 16
cbSize: 18
Unknown extra header dump: [2f] [0] [8] [0] [2] [0] [34] [2] [8] [0] [1] [0] [0] [1] [2] [0] [0] [12]
skip_str: 12 bytes skipped
skip_str: 20 bytes skipped
skip_str: 0 bytes skipped
skip_str: 16 bytes skipped
Not audio/video stream or unsupported!
VIDEO:  RV40 [40002000,01081020]  320x240  (aspect 0.00)  20.00 fps
Clip info:
name: 冰鱼工作室
author: 冰鱼工作室
copyright: 冰鱼工作室(C) 2002
==========================================================================
Opening audio decoder: [realaud] RealAudio decoder
opening shared obj '/usr/lib/RealPlayer8/Codecs/cook.so.6.0'
Error: /usr/lib/RealPlayer8/Codecs/cook.so.6.0: cannot open shared object file: No such file or directory
opening win32 dll '/usr/lib/RealPlayer8/Codecs/cook.so.6.0'
Win32 LoadLibrary failed to load: /usr/lib/RealPlayer8/Codecs/cook.so.6.0, /usr/lib/win32//usr/lib/RealPlayer8/Codecs/cook.so.6.0, /usr/local/lib/win32//usr/lib/RealPlayer8/Codecs/cook.so.6.0
Error loading dll
ERROR: Could not open required DirectShow codec cook.so.6.0.
Read the RealAudio section of the DOCS!
ADecoder preinit failed
ADecoder init failed
*** Try to upgrade /root/.mplayer/codecs.conf from etc/codecs.conf
*** If it still does not work, read DOCS/codecs.html!
Cannot find codec for audio format 0x6B6F6F63.
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
It seems there is no Xvideo support for your video card available.
Run 'xvinfo' to verify its Xv support, and read Xv section of DOCS/video.html !
See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
==========================================================================
Opening video decoder: [realvid] RealVideo decoder
opening shared obj '/usr/lib/RealPlayer8/Codecs/drv4.so.6.0'
Error: /usr/lib/RealPlayer8/Codecs/drv4.so.6.0: cannot open shared object file: No such file or directory
opening win32 dll '/usr/lib/RealPlayer8/Codecs/drv4.so.6.0'
Win32 LoadLibrary failed to load: /usr/lib/RealPlayer8/Codecs/drv4.so.6.0, /usr/lib/win32//usr/lib/RealPlayer8/Codecs/drv4.so.6.0, /usr/local/lib/win32//usr/lib/RealPlayer8/Codecs/drv4.so.6.0
Error loading dll
ERROR: Could not open required DirectShow codec drv4.so.6.0.
Read the RealVideo section of the DOCS!
VDecoder init failed
Opening video decoder: [realvid] RealVideo decoder
opening shared obj '/usr/lib/RealPlayer8/Codecs/drv43260.dll'
Error: /usr/lib/RealPlayer8/Codecs/drv43260.dll: cannot open shared object file: No such file or directory
opening win32 dll '/usr/lib/RealPlayer8/Codecs/drv43260.dll'
Win32 LoadLibrary failed to load: /usr/lib/RealPlayer8/Codecs/drv43260.dll, /usr/lib/win32//usr/lib/RealPlayer8/Codecs/drv43260.dll, /usr/local/lib/win32//usr/lib/RealPlayer8/Codecs/drv43260.dll
Error loading dll
ERROR: Could not open required DirectShow codec drv43260.dll.
Read the RealVideo section of the DOCS!
VDecoder init failed
*** Try to upgrade /root/.mplayer/codecs.conf from etc/codecs.conf
*** If it still does not work, read DOCS/codecs.html!
Cannot find codec matching selected -vo and video format 0x30345652.
==========================================================================


Exiting... (End of file)
发表于 2003-7-15 14:57:33 | 显示全部楼层

安装MDK自己带的就可以了吧

在rpms3里面有RPM文件,直接在图形界面下安装所有以MPLAYER开头的包,什么问题也没有,而且非常流畅!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表