有用SUSE 10.3 XEN内核启动的吗？有问题请教

polox

我用XEN内核启动，无法进入X桌面，且分辨率很低，显示不全输出信息，在menu.lst中修改该vga参数也管用。
有用过的吗？有同样的问题吗?

grub配置文件已经设置了分辨率：


###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN -- openSUSE 10.3 - 2.6.22.9-0.4
    root (hd0,8)
    kernel /boot/xen.gz
    module /boot/vmlinuz-2.6.22.9-0.4-xen root=/dev/disk/by-id/scsi-SATA_ST3250820AS_6QE0KB0Y-part9 vga=0x31a noapic resume=/dev/sda8 splash=silent showopts
    module /boot/initrd-2.6.22.9-0.4-xen

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.9-0.4
    root (hd0,8)
    kernel /boot/vmlinuz-2.6.22.9-0.4-default root=/dev/disk/by-id/scsi-SATA_ST3250820AS_6QE0KB0Y-part9 vga=0x31a noapic resume=/dev/sda8 splash=silent showopts
    initrd /boot/initrd-2.6.22.9-0.4-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.9-0.4
    root (hd0,8)
    kernel /boot/vmlinuz-2.6.22.9-0.4-default root=/dev/disk/by-id/scsi-SATA_ST3250820AS_6QE0KB0Y-part9 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
    initrd /boot/initrd-2.6.22.9-0.4-default

###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
    rootnoverify (hd0,8)
    chainloader (hd0,0)+1

rei2006

你没有运行过“Install Hypervisor and Tools”吧？在正常模式下搞好哈！

polox

Post by rei2006
你没有运行过“Install Hypervisor and Tools”吧？在正常模式下搞好哈！

楼上详细说一下方法好吗？谢谢