安装fcitx3.1.1出现的错误信息

老虎张大口

[man@localhost download]$ tar jxvf fcitx-3.1.1.tar.bz2
fcitx-3.1.1/
fcitx-3.1.1/doc/
fcitx-3.1.1/doc/cjkvinput.txt
fcitx-3.1.1/doc/Makefile.am
fcitx-3.1.1/doc/Makefile.in
fcitx-3.1.1/doc/fcitx3.odt
fcitx-3.1.1/doc/fcitx3.pdf
fcitx-3.1.1/doc/wb_fh.htm
fcitx-3.1.1/lib/
fcitx-3.1.1/lib/FrameMgr.c
fcitx-3.1.1/lib/FrameMgr.h
fcitx-3.1.1/lib/i18nX.c
fcitx-3.1.1/lib/Xi18nX.h
fcitx-3.1.1/lib/IMValues.c
fcitx-3.1.1/lib/IMConn.c
fcitx-3.1.1/lib/Xi18n.h
fcitx-3.1.1/lib/i18nIc.c
fcitx-3.1.1/lib/i18nMethod.c
fcitx-3.1.1/lib/IMMethod.c
fcitx-3.1.1/lib/i18nAttr.c
fcitx-3.1.1/lib/Makefile.am
fcitx-3.1.1/lib/Makefile.in
fcitx-3.1.1/lib/i18nClbk.c
fcitx-3.1.1/lib/XimProto.h
fcitx-3.1.1/lib/IMdkit.h
fcitx-3.1.1/lib/i18nIMProto.c
fcitx-3.1.1/lib/i18nPtHdr.c
fcitx-3.1.1/lib/XimFunc.h
fcitx-3.1.1/lib/i18nUtil.c
fcitx-3.1.1/lib/Xi18nTr.h
fcitx-3.1.1/src/
fcitx-3.1.1/src/IC.c
fcitx-3.1.1/src/IC.h
fcitx-3.1.1/src/py.c
fcitx-3.1.1/src/py.h
fcitx-3.1.1/src/qw.c
fcitx-3.1.1/src/qw.h
fcitx-3.1.1/src/sp.c
fcitx-3.1.1/src/sp.h
fcitx-3.1.1/src/ui.c
fcitx-3.1.1/src/ui.h
fcitx-3.1.1/src/version.h.in
fcitx-3.1.1/src/InputWindow.c
fcitx-3.1.1/src/InputWindow.h
fcitx-3.1.1/src/ime.c
fcitx-3.1.1/src/ime.h
fcitx-3.1.1/src/xim.c
fcitx-3.1.1/src/xim.h
fcitx-3.1.1/src/PYFA.c
fcitx-3.1.1/src/PYFA.h
fcitx-3.1.1/src/MainWindow.c
fcitx-3.1.1/src/MainWindow.h
fcitx-3.1.1/src/table.c
fcitx-3.1.1/src/table.h
fcitx-3.1.1/src/pyMapTable.c
fcitx-3.1.1/src/pyMapTable.h
fcitx-3.1.1/src/Makefile.am
fcitx-3.1.1/src/Makefile.in
fcitx-3.1.1/src/tools.c
fcitx-3.1.1/src/tools.h
fcitx-3.1.1/src/main.c
fcitx-3.1.1/src/main.h
fcitx-3.1.1/src/punc.c
fcitx-3.1.1/src/punc.h
fcitx-3.1.1/src/Makefile.old
fcitx-3.1.1/src/KeyList.c
fcitx-3.1.1/src/KeyList.h
fcitx-3.1.1/src/pyParser.c
fcitx-3.1.1/src/pyParser.h
fcitx-3.1.1/src/MyErrorsHandlers.c
fcitx-3.1.1/src/MyErrorsHandlers.h
fcitx-3.1.1/xpm/
fcitx-3.1.1/xpm/lx-0.xpm
fcitx-3.1.1/xpm/lx-1.xpm
fcitx-3.1.1/xpm/gbk-0.xpm
fcitx-3.1.1/xpm/gbk-1.xpm
fcitx-3.1.1/xpm/engPunc.xpm
fcitx-3.1.1/xpm/chnPunc.xpm
fcitx-3.1.1/xpm/Makefile.am
fcitx-3.1.1/xpm/Makefile.in
fcitx-3.1.1/xpm/fullcorner.xpm
fcitx-3.1.1/xpm/prev.xpm
fcitx-3.1.1/xpm/next.xpm
fcitx-3.1.1/xpm/logo.xpm
fcitx-3.1.1/xpm/halfcorner.xpm
fcitx-3.1.1/xpm/lock-0.xpm
fcitx-3.1.1/xpm/lock-1.xpm
fcitx-3.1.1/TODO
fcitx-3.1.1/data/
fcitx-3.1.1/data/punc.mb
fcitx-3.1.1/data/cj.mb
fcitx-3.1.1/data/pyphrase.mb
fcitx-3.1.1/data/erbi.mb
fcitx-3.1.1/data/gbkpy.org
fcitx-3.1.1/data/cj.txt
fcitx-3.1.1/data/pySym.mb
fcitx-3.1.1/data/Makefile.am
fcitx-3.1.1/data/Makefile.in
fcitx-3.1.1/data/pyPhrase.org
fcitx-3.1.1/data/sp.dat
fcitx-3.1.1/data/wbx.mb
fcitx-3.1.1/data/wbx.txt
fcitx-3.1.1/data/tables.conf
fcitx-3.1.1/data/erbi.txt
fcitx-3.1.1/data/pybase.mb
fcitx-3.1.1/depcomp
fcitx-3.1.1/aclocal.m4
fcitx-3.1.1/tools/
fcitx-3.1.1/tools/txt2mb.c
fcitx-3.1.1/tools/createPYMB.c
fcitx-3.1.1/tools/Makefile.am
fcitx-3.1.1/tools/Makefile.in
fcitx-3.1.1/tools/mb2txt.c
fcitx-3.1.1/README
fcitx-3.1.1/THANKS
fcitx-3.1.1/configure
fcitx-3.1.1/configure.in
fcitx-3.1.1/config.guess
fcitx-3.1.1/config.rpath
fcitx-3.1.1/install-sh
fcitx-3.1.1/autogen.sh
fcitx-3.1.1/config.sub
fcitx-3.1.1/missing
fcitx-3.1.1/debian/
fcitx-3.1.1/debian/dirs
fcitx-3.1.1/debian/docs
fcitx-3.1.1/debian/control
fcitx-3.1.1/debian/rules
fcitx-3.1.1/debian/changelog
fcitx-3.1.1/debian/Makefile.am
fcitx-3.1.1/debian/Makefile.in
fcitx-3.1.1/debian/copyright
fcitx-3.1.1/mkinstalldirs
fcitx-3.1.1/Makefile.am
fcitx-3.1.1/Makefile.in
fcitx-3.1.1/config.h.in
fcitx-3.1.1/fcitx.spec.in
fcitx-3.1.1/AUTHORS
fcitx-3.1.1/INSTALL
fcitx-3.1.1/ChangeLog
fcitx-3.1.1/COPYING
[man@localhost download]$ cd fcitx-3.1.1
[man@localhost fcitx-3.1.1]$ dir
aclocal.m4    config.rpath  debian         lib            src
AUTHORS       config.sub    depcomp        Makefile.am    THANKS
autogen.sh    configure     doc            Makefile.in    TODO
ChangeLog     configure.in  fcitx.spec.in  missing        tools
config.guess  COPYING       INSTALL        mkinstalldirs  xpm
config.h.in   data          install-sh     README
[man@localhost fcitx-3.1.1]$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for iconv declaration...
         extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking malloc/malloc.h usability... no
checking malloc/malloc.h presence... no
checking for malloc/malloc.h... no
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for unistd.h... (cached) yes
checking wait.h usability... yes
checking wait.h presence... yes
checking for wait.h... yes
checking for sys/wait.h... (cached) yes
checking machine/endian.h usability... no
checking machine/endian.h presence... no
checking for machine/endian.h... no
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for pkg-config... /usr/bin/pkg-config
checking for xft >= 0.0.0... yes
checking XFT_CFLAGS... -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config
checking XFT_LIBS... -L/usr/X11R6/lib -lXft -lX11 -lfreetype -lXrender -lfontconfig
checking for pid_t... yes
checking for size_t... yes
checking for unistd.h... (cached) yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking return type of signal handlers... void
checking for memmove... yes
checking for memset... yes
checking for mkdir... yes
checking for setlocale... yes
checking for strcasecmp... yes
checking for strstr... yes
checking for strtol... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating fcitx.spec
config.status: creating doc/Makefile
config.status: creating data/Makefile
config.status: creating debian/Makefile
config.status: creating xpm/Makefile
config.status: creating lib/Makefile
config.status: creating src/version.h
config.status: creating src/Makefile
config.status: creating tools/Makefile
config.status: creating config.h
config.status: executing depfiles commands
[man@localhost fcitx-3.1.1]$ make
make  all-recursive
make[1]: Entering directory `/home/man/tmp/download/fcitx-3.1.1'
Making all in doc
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/doc'
Making all in tools
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/tools'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../src -I../lib    -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config-D_USE_XFT -Wall -MT mb2txt.o -MD -MP -MF ".deps/mb2txt.Tpo" -c -o mb2txt.o mb2txt.c; \
then mv -f ".deps/mb2txt.Tpo" ".deps/mb2txt.Po"; else rm -f ".deps/mb2txt.Tpo"; exit 1; fi
gcc  -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall   -o mb2txt  mb2txt.o  -L/usr/X11R6/lib -L/usr/X11R6/lib -lXft -lX11 -lfreetype -lXrender -lfontconfig-lX11
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../src -I../lib    -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config-D_USE_XFT -Wall -MT txt2mb.o -MD -MP -MF ".deps/txt2mb.Tpo" -c -o txt2mb.o txt2mb.c; \
then mv -f ".deps/txt2mb.Tpo" ".deps/txt2mb.Po"; else rm -f ".deps/txt2mb.Tpo"; exit 1; fi
gcc  -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall   -o txt2mb  txt2mb.o  -L/usr/X11R6/lib -L/usr/X11R6/lib -lXft -lX11 -lfreetype -lXrender -lfontconfig-lX11
./txt2mb ./../data/wbx.txt ../data/wbx.mb

Reading 81157 records.

./txt2mb ./../data/erbi.txt ../data/erbi.mb

Reading 59859 records.

./txt2mb ./../data/cj.txt ../data/cj.mb

Reading 6726 records.

if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../src -I../lib    -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config-D_USE_XFT -Wall -MT createPYMB.o -MD -MP -MF ".deps/createPYMB.Tpo" -c -o createPYMB.o createPYMB.c; \
then mv -f ".deps/createPYMB.Tpo" ".deps/createPYMB.Po"; else rm -f ".deps/createPYMB.Tpo"; exit 1; fi
gcc  -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall   -o createPYMB  createPYMB.o  -L/usr/X11R6/lib -L/usr/X11R6/lib -lXft -lX11 -lfreetype -lXrender -lfontconfig   -lX11
./createPYMB ./../data/gbkpy.org ./../data/pyPhrase.org
转换了 27673 个汉字，共 410 组。
正在保存拼音码表……
OK!


共读入 52196 个词组，成功转换 52196 个！
正在写入词组文件……
OK!
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/tools'
Making all in data
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/data'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/data'
Making all in debian
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/debian'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/debian'
Making all in xpm
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/xpm'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/xpm'
Making all in lib
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/lib'
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT FrameMgr.o -MD -MP -MF ".deps/FrameMgr.Tpo" -c -o FrameMgr.o FrameMgr.c; \
then mv -f ".deps/FrameMgr.Tpo" ".deps/FrameMgr.Po"; else rm -f ".deps/FrameMgr.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nAttr.o -MD -MP -MF ".deps/i18nAttr.Tpo" -c -o i18nAttr.o i18nAttr.c; \
then mv -f ".deps/i18nAttr.Tpo" ".deps/i18nAttr.Po"; else rm -f ".deps/i18nAttr.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nClbk.o -MD -MP -MF ".deps/i18nClbk.Tpo" -c -o i18nClbk.o i18nClbk.c; \
then mv -f ".deps/i18nClbk.Tpo" ".deps/i18nClbk.Po"; else rm -f ".deps/i18nClbk.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nIc.o -MD -MP -MF ".deps/i18nIc.Tpo" -c -o i18nIc.o i18nIc.c; \
then mv -f ".deps/i18nIc.Tpo" ".deps/i18nIc.Po"; else rm -f ".deps/i18nIc.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nIMProto.o -MD-MP -MF ".deps/i18nIMProto.Tpo" -c -o i18nIMProto.o i18nIMProto.c; \
then mv -f ".deps/i18nIMProto.Tpo" ".deps/i18nIMProto.Po"; else rm -f".deps/i18nIMProto.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nMethod.o -MD -MP -MF ".deps/i18nMethod.Tpo" -c -o i18nMethod.o i18nMethod.c; \
then mv -f ".deps/i18nMethod.Tpo" ".deps/i18nMethod.Po"; else rm -f ".deps/i18nMethod.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nPtHdr.o -MD -MP -MF ".deps/i18nPtHdr.Tpo" -c -o i18nPtHdr.o i18nPtHdr.c; \
then mv -f ".deps/i18nPtHdr.Tpo" ".deps/i18nPtHdr.Po"; else rm -f ".deps/i18nPtHdr.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nUtil.o -MD -MP -MF ".deps/i18nUtil.Tpo" -c -o i18nUtil.o i18nUtil.c; \
then mv -f ".deps/i18nUtil.Tpo" ".deps/i18nUtil.Po"; else rm -f ".deps/i18nUtil.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT i18nX.o -MD -MP -MF ".deps/i18nX.Tpo" -c -o i18nX.o i18nX.c; \
then mv -f ".deps/i18nX.Tpo" ".deps/i18nX.Po"; else rm -f ".deps/i18nX.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT IMConn.o -MD -MP -MF ".deps/IMConn.Tpo" -c -o IMConn.o IMConn.c; \
then mv -f ".deps/IMConn.Tpo" ".deps/IMConn.Po"; else rm -f ".deps/IMConn.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT IMMethod.o -MD -MP -MF ".deps/IMMethod.Tpo" -c -o IMMethod.o IMMethod.c; \
then mv -f ".deps/IMMethod.Tpo" ".deps/IMMethod.Po"; else rm -f ".deps/IMMethod.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I..    -c -O2 -fno-strength-reduce -fno-strict-aliasing -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT IMValues.o -MD -MP -MF ".deps/IMValues.Tpo" -c -o IMValues.o IMValues.c; \
then mv -f ".deps/IMValues.Tpo" ".deps/IMValues.Po"; else rm -f ".deps/IMValues.Tpo"; exit 1; fi
rm -f libXimd.a
ar cru libXimd.a FrameMgr.o i18nAttr.o i18nClbk.o i18nIc.o i18nIMProto.o i18nMethod.o i18nPtHdr.o i18nUtil.o i18nX.o IMConn.o IMMethod.o IMValues.o
ranlib libXimd.a
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/lib'
Making all in src
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/src'
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT IC.o -MD -MP -MF ".deps/IC.Tpo" -c -o IC.o IC.c; \
then mv -f ".deps/IC.Tpo" ".deps/IC.Po"; else rm -f ".deps/IC.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT ime.o -MD -MP -MF ".deps/ime.Tpo" -c -o ime.o ime.c; \
then mv -f ".deps/ime.Tpo" ".deps/ime.Po"; else rm -f ".deps/ime.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT InputWindow.o -MD -MP -MF ".deps/InputWindow.Tpo" -c -o InputWindow.o InputWindow.c; \
then mv -f ".deps/InputWindow.Tpo" ".deps/InputWindow.Po"; else rm -f".deps/InputWindow.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT KeyList.o -MD -MP -MF ".deps/KeyList.Tpo" -c -o KeyList.o KeyList.c; \
then mv -f ".deps/KeyList.Tpo" ".deps/KeyList.Po"; else rm -f ".deps/KeyList.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT main.o -MD -MP -MF ".deps/main.Tpo" -c -o main.o main.c; \
then mv -f ".deps/main.Tpo" ".deps/main.Po"; else rm -f ".deps/main.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT MainWindow.o -MD -MP -MF ".deps/MainWindow.Tpo" -c -o MainWindow.o MainWindow.c; \
then mv -f ".deps/MainWindow.Tpo" ".deps/MainWindow.Po"; else rm -f ".deps/MainWindow.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT MyErrorsHandlers.o -MD -MP -MF ".deps/MyErrorsHandlers.Tpo" -c -o MyErrorsHandlers.o MyErrorsHandlers.c; \
then mv -f ".deps/MyErrorsHandlers.Tpo" ".deps/MyErrorsHandlers.Po"; else rm -f ".deps/MyErrorsHandlers.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT punc.o -MD -MP -MF ".deps/punc.Tpo" -c -o punc.o punc.c; \
then mv -f ".deps/punc.Tpo" ".deps/punc.Po"; else rm -f ".deps/punc.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT py.o -MD -MP -MF ".deps/py.Tpo" -c -o py.o py.c; \
then mv -f ".deps/py.Tpo" ".deps/py.Po"; else rm -f ".deps/py.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT PYFA.o -MD -MP -MF ".deps/PYFA.Tpo" -c -o PYFA.o PYFA.c; \
then mv -f ".deps/PYFA.Tpo" ".deps/PYFA.Po"; else rm -f ".deps/PYFA.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT pyMapTable.o -MD -MP -MF ".deps/pyMapTable.Tpo" -c -o pyMapTable.o pyMapTable.c; \
then mv -f ".deps/pyMapTable.Tpo" ".deps/pyMapTable.Po"; else rm -f ".deps/pyMapTable.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT pyParser.o -MD -MP -MF ".deps/pyParser.Tpo" -c -o pyParser.o pyParser.c; \
then mv -f ".deps/pyParser.Tpo" ".deps/pyParser.Po"; else rm -f ".deps/pyParser.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT sp.o -MD -MP -MF ".deps/sp.Tpo" -c -o sp.o sp.c; \
then mv -f ".deps/sp.Tpo" ".deps/sp.Po"; else rm -f ".deps/sp.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT tools.o -MD -MP -MF ".deps/tools.Tpo" -c -o tools.o tools.c; \
then mv -f ".deps/tools.Tpo" ".deps/tools.Po"; else rm -f ".deps/tools.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT ui.o -MD -MP -MF ".deps/ui.Tpo" -c -o ui.o ui.c; \
then mv -f ".deps/ui.Tpo" ".deps/ui.Po"; else rm -f ".deps/ui.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT table.o -MD -MP -MF ".deps/table.Tpo" -c -o table.o table.c; \
then mv -f ".deps/table.Tpo" ".deps/table.Po"; else rm -f ".deps/table.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT xim.o -MD -MP -MF ".deps/xim.Tpo" -c -o xim.o xim.c; \
then mv -f ".deps/xim.Tpo" ".deps/xim.Po"; else rm -f ".deps/xim.Tpo"; exit 1; fi
if gcc -DPKGDATADIR=\"/usr/local/share/fcitx\" -I. -I. -I.. -I../lib -I../xpm   -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall -MT qw.o -MD -MP -MF ".deps/qw.Tpo" -c -o qw.o qw.c; \
then mv -f ".deps/qw.Tpo" ".deps/qw.Po"; else rm -f ".deps/qw.Tpo"; exit 1; fi
gcc -O2 -fno-strength-reduce -g -O2 -I/usr/X11R6/include -I/usr/X11R6/include -I/usr/include/freetype2 -I/usr/include/freetype2/freetype2 -I/usr/include/freetype2/freetype2/config   -D_USE_XFT -Wall   -o fcitx IC.o ime.o InputWindow.o KeyList.o main.o MainWindow.o MyErrorsHandlers.o punc.o py.o PYFA.o pyMapTable.o pyParser.o sp.o tools.o ui.o table.o xim.o qw.o ../lib/libXimd.a -L/usr/X11R6/lib -L/usr/X11R6/lib -lXft -lX11 -lfreetype -lXrender -lfontconfig   -lX11
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/src'
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1'
make[1]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1'
[man@localhost fcitx-3.1.1]$ make install
Making install in doc
make[1]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/doc'
make[2]: Entering directory `/home/man/tmp/download/fcitx-3.1.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/share/fcitx/doc" || mkdir -p -- "/usr/local/share/fcitx/doc"
mkdir: 无法创建目录‘/usr/local/share/fcitx’: Permission denied
make[2]: *** [install-docDATA] 错误 1
make[2]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/doc'
make[1]: *** [install-am] 错误 2
make[1]: Leaving directory `/home/man/tmp/download/fcitx-3.1.1/doc'
make: *** [install-recursive] 错误 1 :ask

fundawang

你不是root么 :ask

老虎张大口

Post by fundawang
你不是root么 :ask

:p
sorry忘记su了

bigbighill

我也出现了错误

[root@localhost win_c2]# cd fcitx-3.1.1
[root@localhost fcitx-3.1.1]# ls
aclocal.m4*    config.h.in*   copying*  fcitx.spec.in*  Makefile.in*    thanks*
authors*       config.rpath*  data/     install*        missing*        todo*
autogen.sh*    config.sub*    debian/   install-sh*     mkinstalldirs*  tools/
ChangeLog*     configure*     depcomp*  lib/            readme*         xpm/
config.guess*  configure.in*  doc/      Makefile.am*    src/
[root@localhost fcitx-3.1.1]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for iconv declaration...
         extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking malloc/malloc.h usability... no
checking malloc/malloc.h presence... no
checking for malloc/malloc.h... no
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for unistd.h... (cached) yes
checking wait.h usability... yes
checking wait.h presence... yes
checking for wait.h... yes
checking for sys/wait.h... (cached) yes
checking machine/endian.h usability... no
checking machine/endian.h presence... no
checking for machine/endian.h... no
checking for X... no
checking for pkg-config... /usr/bin/pkg-config
checking for xft >= 0.0.0... Package xft was not found in the pkg-config search path.
Perhaps you should add the directory containing `xft.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xft' found
configure: WARNING: No xft found, skipping configure for FreeType and Xft
checking for pid_t... yes
checking for size_t... yes
checking for unistd.h... (cached) yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... no
checking for vfork... no
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... no
checking return type of signal handlers... void
checking for memmove... no
checking for memset... no
checking for mkdir... no
checking for setlocale... no
checking for strcasecmp... no
checking for strstr... no
checking for strtol... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating fcitx.spec
config.status: creating doc/Makefile
config.status: creating data/Makefile
config.status: creating debian/Makefile
config.status: creating xpm/Makefile
config.status: creating lib/Makefile
config.status: creating src/version.h
config.status: creating src/Makefile
config.status: creating tools/Makefile
config.status: creating config.h
config.status: executing depfiles commands
[root@localhost fcitx-3.1.1]# make
make  all-recursive
make[1]: Entering directory `/mnt/win_c2/fcitx-3.1.1'
Making all in doc
make[2]: Entering directory `/mnt/win_c2/fcitx-3.1.1/doc'
make[3]: Entering directory `/mnt/win_c2/fcitx-3.1.1'
make[3]: Leaving directory `/mnt/win_c2/fcitx-3.1.1'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/win_c2/fcitx-3.1.1/doc'
Making all in tools
make[2]: Entering directory `/mnt/win_c2/fcitx-3.1.1/tools'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../src -I../lib    -g -O2 -INONE -Wall -MT mb2txt.o -MD -MP -MF ".deps/mb2txt.Tpo" -c -o mb2txt.o mb2txt.c; \
then mv -f ".deps/mb2txt.Tpo" ".deps/mb2txt.Po"; else rm -f ".deps/mb2txt.Tpo"; exit 1; fi
gcc  -g -O2 -INONE -Wall   -o mb2txt  mb2txt.o  -LNONE -lX11
/usr/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make[2]: *** [mb2txt] 错误 1
make[2]: Leaving directory `/mnt/win_c2/fcitx-3.1.1/tools'
make[1]: *** [all-recursive] 错误 1
make[1]: Leaving directory `/mnt/win_c2/fcitx-3.1.1'
make: *** [all] 错误 2
[root@localhost fcitx-3.1.1]# make install
Making install in doc
make[1]: Entering directory `/mnt/win_c2/fcitx-3.1.1/doc'
make[2]: Entering directory `/mnt/win_c2/fcitx-3.1.1'
make[2]: Leaving directory `/mnt/win_c2/fcitx-3.1.1'
make[2]: Entering directory `/mnt/win_c2/fcitx-3.1.1/doc'
make[3]: Entering directory `/mnt/win_c2/fcitx-3.1.1'
make[3]: Leaving directory `/mnt/win_c2/fcitx-3.1.1'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/share/fcitx/doc" || mkdir -p -- "/usr/local/share/fcitx/doc"
/usr/bin/install -c -m 644 'cjkvinput.txt' '/usr/local/share/fcitx/doc/cjkvinput.txt'
/usr/bin/install -c -m 644 'wb_fh.htm' '/usr/local/share/fcitx/doc/wb_fh.htm'
/usr/bin/install -c -m 644 'fcitx3.pdf' '/usr/local/share/fcitx/doc/fcitx3.pdf'
make[2]: Leaving directory `/mnt/win_c2/fcitx-3.1.1/doc'
make[1]: Leaving directory `/mnt/win_c2/fcitx-3.1.1/doc'
Making install in tools
make[1]: Entering directory `/mnt/win_c2/fcitx-3.1.1/tools'
gcc  -g -O2 -INONE -Wall   -o mb2txt  mb2txt.o  -LNONE -lX11
/usr/bin/ld: cannot find -lX11
collect2: ld returned 1 exit status
make[1]: *** [mb2txt] 错误 1
make[1]: Leaving directory `/mnt/win_c2/fcitx-3.1.1/tools'
make: *** [install-recursive] 错误 1


请教斑竹，帮忙看看， mdk10.1  安装之前，系统已经安装了fcitx 3.0.0了

bigbighill

到fcitx网站看了说明好象好象不需要xft的支持也可以安装，但我disable xft安装会影响使用吗，mdk10.1的第四张cd中有xft包吗，

第二个错误好象就也是缺少什么包，  

请高手指点一下

superlj

为什么不用rpm包安装？

bigbighill

我在linux公社下载了一个，不行

后来到fcitx官方网站下载了一个字预编译包，安装成功

fundawang

没有安装xorg的devel包。