如何让ICEWM,BLACKBOX等桌面记录调整好后的分辨率？

9122

10.0,主板KM400集成显卡，17寸PHILIPS107X2，安装了显卡驱动，调整好了刷新率参数，但是系统的默认的开机分辨率就设为了最高1400X1050，在登陆窗口的时候就是这样，在KDE下，如果不在 系统 配置 配置你的桌面 外设 显示 下调整合适的刷新率和分辨率后点选那个"在KDE启动时应用设置"的话，那么再次启动KDE的时候，就又会是最高分辨率&最低刷新率；好在KDE&GNOME都可以有如上的办法解决这个问题，但是其他的桌面就没有找到类似的设置，虽然可以用xrandr调整，但是，有的桌面在使用这个命令后只截取了原屏幕1024X768的左上部分，下面的任务栏都看不到；记得原来装好驱动调整好后都是在登陆界面的时候就已经是合适的分辨率和刷新率了，请问是那里的问题？

下面是我的XF86Config-4

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "rotocol" "IMPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "4 5"
EndSection
# XFree86 4.0 configuration generated by Xconfigurator

Section "ServerLayout"
    Identifier "XFree86 Configured"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    Screen 0  "Screen0" 0 0
EndSection
# By default, Red Hat Linux 6.0 and later use xfs

Section "Files"
    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
   
    # FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
    FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath "/usr/share/fonts/zh_CN/TrueType/simsun"
    # FontPath "unix/:7100"
EndSection
# Module loading section

Section "Module"
    Load "dbe"                # Double-buffering
    Load "GLcore"                # OpenGL support
    Load "dri"                # Direct rendering infrastructure
    Load "glx"                # OpenGL X protocol interface
    Load "extmod"                # Misc. required extensions
    Load "v4l"                # Video4Linux
    Load "xtt"
   
    # Load  "record"        # X event recorder
    # You only need the following two modules if you do not use xfs.
    #Load "freetype"         # TrueType font handler
    #Load "type1"                # Adobe Type 1 font handler
   
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
   
    Subsection "extmod"
        EndSubsection
EndSection
# marked omit xfree86-dga by Cyberlink's suggesstion
# Option    "omit xfree86-dga"   # don't initialise the DGA extension

Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "XkbLayout" "us"
EndSection

Section "Monitor"
    Identifier "TS031D"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 30 - 70
    VertRefresh 50 - 160
    #Refresh Rate 60Hz
    #Refresh Rate 75Hz
    #Refresh Rate 85Hz
    Option "dpms"
    ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
    ModeLine "720x576" 32.7 720 744 816 912 576 577 580 597
    ModeLine "848x480" 31.5 848 864 952 1056 480 481 484 497
    ModeLine "856x480" 31.7 856 872 960 1064 480 481 484 497
    ModeLine "1024x512" 41.3 1024 1056 1160 1296 512 513 516 531
    ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795
    ModeLine "1440x1050" 126.2 1440 1536 1688 1936 1050 1051 1054 1087
    ModeLine "720x480" 34.9 720 752 824 928 480 481 484 502
    ModeLine "720x576" 42.6 720 760 832 944 576 577 580 602
    ModeLine "848x480" 41.0 848 880 968 1088 480 481 484 502
    ModeLine "856x480" 41.3 856 888 976 1096 480 481 484 502
    ModeLine "1024x512" 53.3 1024 1072 1176 1328 512 513 516 535
    ModeLine "1280x768" 103.0 1280 1360 1496 1712 768 769 772 802
    ModeLine "1440x1050" 160.0 1440 1536 1696 1952 1050 1051 1054 1096
    ModeLine "1280x768" 118.5 1280 1368 1504 1728 768 769 772 807
    ModeLine "1440x1050" 184.5 1440 1544 1704 1968 1050 1051 1054 1103
    ModeLine "848x480" 47.4 848 888 976 1104 480 481 484 505
    ModeLine "1024x768"     94.50   1024 1072 1168 1376    768  769  772  773 +hsync +vsync
EndSection

Section "Device"
    Identifier "CLE266"
    BoardName "Unknown"
    Driver "via"
    #Option "LowRes"
    #Option "Cap1Brightness" "128"
    #Option "Cap1SVideoMode" "7"
    #Option "Cap1Hue" "0"
    #Option "Cap1UseIRQ"
    #Option "MpegHQVVFilterMode" "0"
    #Option "Cap0Brightness" "128"           # 0-255
    #Option "Cap0VDODecoderI2C" "64"
    Option "NoDDCValue"
    #Option "Cap0TunerI2C" "192"
    #Option "TVEncoder" "FS454"
    #Option "Cap1Standard" "NTSC"
    #Option "Cap1TunerI2C" "198"
    #Option "Cap0CompositeMode" "2"
    #Option "Cap0Scaler" "0"
    #Option "Cap1TunerMode" "0"
    #Option "Cap0Saturation" "64"            # 0-255
    #Option "Cap1Saturation" "64"
    #Option "HWCursor"
    #Option "NoMPEGAddOneLineOnBottom"
    #Option "Cap0FieldSwap"
    #Option "Cap0Contrast" "71"              # 0-255
    Option "TVDotCrawl"
    #Option "ShadowFB"
    Option "TVVScan" "over"
    #Option "HQVFilterManualSelect"
    #Option "Cap1CompositeMode" "2"
    Option "TVType" "NTSC"
    #Option "CapInterVersion" "30"
    #Option "MpegHQVHFilterMode" "0"
    #Option "Cap0TunerDev" "FI1236MK2"
    #Option "Cap1VDODecoderI2C" "66"
    #Option "Cap1VDODecoderDev" "SAA7114"
    #Option "Cap1TunerDev" "FI1236MK2"
    #Option "Refresh" "60"
    #Option "UseBIOS"
    #Option "SWCursor"
    #Option "Cap0Hue" "0"                    # 0-255
    #Option "NoCap1HFilter"
    Option "ActiveDevice" "CRT,TV"
    #Option "NoCap0HFilter"
    #Option "anelSize" "1280x1024"
    #Option "Cap0DataWidth" "8"
    #Option "A2"
    #Option "Center"
    #Option "SetMpegFBNumber"
    #Option "Cap0TunerMode" "0"
    #Option "Cap0VDODecoderDev" "SAA7114"    # SAA7113/SAA7114/SAA7108
    #Option "Cap0Standard" "NTSC"            # NTSC/PAL/SECAM
    #Option "Cap0Deinterlace" "bob"  # Bob/Weave
    Option "TVOutput" "S-Video"
    #Option "Cap1Scaler" "0"
    #Option "HQVManualSwitch"
    #Option "Cap1DataWidth" "8"
    #Option "Cap1Contrast" "71"
    #Option "Cap1NoAutoDetect"
    #Option "Cap1Deinterlace" "bob"  # Bob/Weave
    #Option "Cap0SVideoMode" "7"             # SAA7113:9, SAA7114:7
    #Option "Cap0NoAutoDetect"
    #Option "TVCLKIN" "30"
    #Option "DisableVQ"
    #Option "CaptureOverScanOff"
EndSection

Section "Device"
    Identifier "Linux Frame Buffer"
    BoardName "Unknown"
    Driver "fbdev"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device "CLE266"
    Monitor "TS031D"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Virtual 1024 768
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Virtual 1024 768
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Virtual 1024 768
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Virtual 1024 768
    EndSubsection
    DefaultDepth 24
EndSection

Section "DRI"
    Mode 0666
EndSection