modular xorg 7.0似乎进sid了

pupilzeng · 发表于 2006-4-12 18:41:07

Post by mingyou
升级了，一切顺利，发现不能ctrl+alt+Fn进控制台了。而且默认的鼠标图案变成与好久以前的那个版本一样了。有点趣味，正在体验中。

这应该是你的键盘配置出了问题

自然平衡 · 发表于 2006-4-12 18:54:46

Post by pupilzeng
这应该是你的键盘配置出了问题

真的吗？升级后我的也变成那样了。
暂时将就用着，等待继续更新。。。。。

sspook · 发表于 2006-4-12 19:00:44

Post by 超级用户
不知道我的i810显卡能否正常驱动了……

已经升级完毕了，键盘布局没有动，目前一切正常。我的显卡也是用i810驱动的。

mingyou · 发表于 2006-4-12 19:43:27

æ，我的firefox与seamonkeyý打不开了。

pluskid · 发表于 2006-4-12 19:54:07

升级之后gtk程序好像都打不开，运行scim-setup出现：

(scim-setup:4210): Gtk-CRITICAL **: gtk_widget_set_sensitive: assertion `GTK_IS_WIDGET (widget)' failed
(scim-setup:4210): Gtk-CRITICAL **: gtk_widget_set_sensitive: assertion `GTK_IS_WIDGET (widget)' failed
The program 'scim-setup' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadRequest (invalid request code or no such operation)'.
(Details: serial 169 error_code 1 request_code 152 minor_code 23)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)

复制代码

运行emacs-gtk出现：

Fatal error (11)Segmentation fault (core dumped)

复制代码

ps. core dumped 的那个core文件用什么打开呀？用gdb打开他说：
"core" is not a core dump: File format not recognized
幸好目前scim还可以用。

mingyou · 发表于 2006-4-12 19:57:07

现在我在GNOME下可以运行GTK程序，而在KDE下大型的GTK程序全部没法运行。
而且在GNOME下运行时也有问题。
等他升级吧。

pluskid · 发表于 2006-4-12 20:47:31

恩，在gnome下可以运行emacs-snapshot-gtk，但是在KDE里面就不行了。

conwood · 发表于 2006-4-12 21:44:29

I got the same problem

Post by pluskid
升级之后gtk程序好像都打不开，运行scim-setup出现：

(scim-setup:4210): Gtk-CRITICAL **: gtk_widget_set_sensitive: assertion `GTK_IS_WIDGET (widget)' failed

(scim-setup:4210): Gtk-CRITICAL **: gtk_widget_set_sensitive: assertion `GTK_IS_WIDGET (widget)' failed

The program 'scim-setup' received an X Window System error.

This probably reflects a bug in the program.

The error was 'BadRequest (invalid request code or no such operation)'.

(Details: serial 169 error_code 1 request_code 152 minor_code 23)

(Note to programmers: normally, X errors are reported asynchronously;

that is, you will receive the error a while after causing it.

To debug your program, run it with the --sync command line

option to change this behavior. You can then get a meaningful

backtrace from your debugger if you break on the gdk_x_error() function.)

复制代码

运行emacs-gtk出现：

Fatal error (11)Segmentation fault (core dumped)

复制代码

ps. core dumped 的那个core文件用什么打开呀？用gdb打开他说：
"core" is not a core dump: File format not recognized
幸好目前scim还可以用。

linuxcpp · 发表于 2006-4-12 21:52:59

我的一切正常
刚升级的
就是emacs-snapshot-unicode-x又不能输入汉字了

pluskid · 发表于 2006-4-13 08:01:30

[zt]

发信人: dlzcn (又没雨伞了), 板面: LinuxApp
标  题: Re: X11R7 in Debian Sid now...
发信站: 飘渺水云间 (Thu Apr 13 00:08:21 2006), 站内信件

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=362049

Debian Bug report logs - #362049
libxfixes3: XFixesSetCursorName (no such operation)
Package: libxfixes3; Maintainer for libxfixes3 is Debian X Strike Force
<debian-x@lists.debian.org>; Source for libxfixes3 is libxfixes.
Reported by: Nick Lewycky <nicholas@mxc.ca>; Date: Tue, 11 Apr 2006 23:03:32
UTC.
Severity: grave;

View this report as an mbox folder.
Report forwarded to debian-bugs-dist@lists.debian.org, Debian X Strike Force
<debian-x@lists.debian.org>:
Bug#362049; Package libxfixes3. Full text and rfc822 format available.
Acknowledgement sent to Nick Lewycky <nicholas@mxc.ca>:
New Bug report received and forwarded. Copy sent to Debian X Strike Force
<debian-x@lists.debian.org>. Full text and rfc822 format available.

Message received at submit@bugs.debian.org (full text, mbox):

From: Nick Lewycky <nicholas@mxc.ca>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: libxfixes3: XFixesSetCursorName (no such operation)
Date: Tue, 11 Apr 2006 18:59:35 -0400

Package: libxfixes3
Version: 1:3.0.1.2-2
Severity: grave
Justification: renders package unusable

After upgrading to X.org 7, I can no longer launch most X11
programs. This includes xterm, xemacs, gnome-terminal, xmms,
etc.

$ xterm
X Error of failed request:  BadRequest (invalid request code or no such
operation)
  Major opcode of failed request:  154 (XFIXES)
  Minor opcode of failed request:  23 (XFixesSetCursorName)
  Serial number of failed request:  24
  Current serial number in output stream:  25

xmms gives a different error message from the GDK, but
implicating the same major/minor.

Nick Lewycky

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15.6
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages libxfixes3 depends on:
ii  libc6                      2.3.6-6 GNU C Library: Shared libraries
ii  libx11-6                   2:1.0.0-5  X11 client-side library
ii  x11-common                   1:7.0.10 X Window System (X.Org) infrastruc

libxfixes3 recommends no packages.

-- no debconf information

Information forwarded to debian-bugs-dist@lists.debian.org, Debian X Strike
Force <debian-x@lists.debian.org>:
Bug#362049; Package libxfixes3. Full text and rfc822 format available.
Acknowledgement sent to Sven Hartge <sven@svenhartge.de>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force
<debian-x@lists.debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: Sven Hartge <sven@svenhartge.de>
To: 362049@bugs.debian.org
Subject: Re: libxfixes3: XFixesSetCursorName (no such operation)
Date: Wed, 12 Apr 2006 02:23:49 +0200 (CEST)

Hello.

If you are a Gnome user, you can try this workaround:

Open your ~/.gconf/%gconf-tree.xml and locate the following entry:

  <entry name="cursor_theme" mtime="1144799098" type="string">
   <stringvalue>XXXXX</stringvalue>
  </entry>

Most users will have "Industrial" in there. Just change it to something
else, like shown above.

If you still use the split XML tree, the entry is inside
~/.gconf/desktop/gnome/peripherals/mouse/%gconf.xml

This change reverts your cursor style to the plain old X11 one, but stops
the constant errors. At least for me, so far.

Grü?e,
Sven.

--
Sven Hartge -- professioneller Unix-Geek
Meine Gedanken im Netz: http://www.svenhartge.de/

Achtung, neue Mail-Adresse: sven@svenhartge.de

Information forwarded to debian-bugs-dist@lists.debian.org, Debian X Strike
Force <debian-x@lists.debian.org>:
Bug#362049; Package libxfixes3. Full text and rfc822 format available.
Acknowledgement sent to Sven Hartge <sven@svenhartge.de>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force
<debian-x@lists.debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: Sven Hartge <sven@svenhartge.de>
To: 362049@bugs.debian.org
Subject: Re: libxfixes3: XFixesSetCursorName (no such operation)
Date: Wed, 12 Apr 2006 02:28:07 +0200 (CEST)

Um 02:23 Uhr am 12.04.06 schrieb Sven Hartge:

> Open your ~/.gconf/%gconf-tree.xml and locate the following entry:
>
> <entry name="cursor_theme" mtime="1144799098" type="string">
>    <stringvalue>XXXXX</stringvalue>
> </entry>
>
> Most users will have "Industrial" in there. Just change it to something
> else, like shown above.

Using gconftool is easier and works at once, no need to logout and login
again.

gconftool-2 -s /desktop/gnome/peripherals/mouse/cursor_theme -t string XXXXX

Grü?e,
Sven.

--
Sven Hartge -- professioneller Unix-Geek
Meine Gedanken im Netz: http://www.svenhartge.de/

Achtung, neue Mail-Adresse: sven@svenhartge.de

Information forwarded to debian-bugs-dist@lists.debian.org, Debian X Strike
Force <debian-x@lists.debian.org>:
Bug#362049; Package libxfixes3. Full text and rfc822 format available.
Acknowledgement sent to David Nusinow <david_nusinow@verizon.net>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force
<debian-x@lists.debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: David Nusinow <david_nusinow@verizon.net>
To: Nick Lewycky <nicholas@mxc.ca>, 362049@bugs.debian.org
Cc: control@bugs.debian.org
Subject: Re: Bug#362049: libxfixes3: XFixesSetCursorName (no such operation)
Date: Tue, 11 Apr 2006 21:10:42 -0400

reassign 362049 gtk-engines-industrial
thanks

On Tue, Apr 11, 2006 at 06:59:35PM -0400, Nick Lewycky wrote:
> Package: libxfixes3
> Version: 1:3.0.1.2-2
> Severity: grave
> Justification: renders package unusable
>
> After upgrading to X.org 7, I can no longer launch most X11
> programs. This includes xterm, xemacs, gnome-terminal, xmms,
> etc.
>
> $ xterm
> X Error of failed request:  BadRequest (invalid request code or no such
operation)
> Major opcode of failed request:  154 (XFIXES)
> Minor opcode of failed request:  23 (XFixesSetCursorName)
> Serial number of failed request:  24
> Current serial number in output stream:  25
>
> xmms gives a different error message from the GDK, but
> implicating the same major/minor.

Ok, after discussing this bug with the submitter on IRC, he managed to fix
it by removing gtk-engines-industrial. He says that the strace shows the
apps are all looking for the Inustrial cursor theme. Reassigning the bug
there. Thanks!

- David Nusinow

Information forwarded to debian-bugs-dist@lists.debian.org, Debian X Strike
Force <debian-x@lists.debian.org>:
Bug#362049; Package libxfixes3. Full text and rfc822 format available.
Acknowledgement sent to Nick Lewycky <nicholas@mxc.ca>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force
<debian-x@lists.debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: Nick Lewycky <nicholas@mxc.ca>
To: 362049@bugs.debian.org
Cc: control@bugs.debian.org
Subject: Re: Bug#362049: libxfixes3: XFixesSetCursorName (no such operation)
Date: Tue, 11 Apr 2006 21:14:13 -0400

[Message part 1 (text/plain, inline)]

reassign 362049 gtk2-engines-industrial
thanks dude

This package causes breakage in any Athena-using program when installed
with the new Xorg packages.

I'm attaching an strace of xedit which shows xedit finding the cursor
and trying to speak xcursor/xfixes to the X server.

Nick Lewycky

[xedit.trace (text/plain, inline)]

execve("/usr/bin/xedit", ["xedit"], [/* 33 vars */]) = 0
uname({sys="Linux", node="calvin", ...}) = 0
brk(0)                               = 0x80c8000
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x5556d000
access("/etc/ld.so.preload", R_OK)    = -1 ENOENT (No such file or directory)
open("/home/nicholas/Fresco/lib/tls/i686/sse2/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/i686/sse2/cmov", 0xffffc864) = -1 ENOENT
(No such file or directory)
open("/home/nicholas/Fresco/lib/tls/i686/sse2/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/i686/sse2", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/Fresco/lib/tls/i686/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/i686/cmov", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/Fresco/lib/tls/i686/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/i686", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/Fresco/lib/tls/sse2/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/sse2/cmov", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/Fresco/lib/tls/sse2/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/sse2", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/Fresco/lib/tls/cmov/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/Fresco/lib/tls/cmov", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/Fresco/lib/tls/libXaw.so.7", O_RDONLY) = -1 ENOENT (No such
file or directory)
stat64("/home/nicholas/Fresco/lib/tls", 0xffffc864) = -1 ENOENT (No such file or
directory)
open("/home/nicholas/Fresco/lib/i686/sse2/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/Fresco/lib/i686/sse2/cmov", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/Fresco/lib/i686/sse2/libXaw.so.7", O_RDONLY) = -1 ENOENT
(No such file or directory)
stat64("/home/nicholas/Fresco/lib/i686/sse2", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/Fresco/lib/i686/cmov/libXaw.so.7", O_RDONLY) = -1 ENOENT
(No such file or directory)
stat64("/home/nicholas/Fresco/lib/i686/cmov", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/Fresco/lib/i686/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/Fresco/lib/i686", 0xffffc864) = -1 ENOENT (No such file
or directory)
open("/home/nicholas/Fresco/lib/sse2/cmov/libXaw.so.7", O_RDONLY) = -1 ENOENT
(No such file or directory)
stat64("/home/nicholas/Fresco/lib/sse2/cmov", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/Fresco/lib/sse2/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/Fresco/lib/sse2", 0xffffc864) = -1 ENOENT (No such file
or directory)
open("/home/nicholas/Fresco/lib/cmov/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/Fresco/lib/cmov", 0xffffc864) = -1 ENOENT (No such file
or directory)
open("/home/nicholas/Fresco/lib/libXaw.so.7", O_RDONLY) = -1 ENOENT (No such
file or directory)
stat64("/home/nicholas/Fresco/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) =
0
open("/home/nicholas/amzi_7-0-11/lib/tls/i686/sse2/cmov/libXaw.so.7", O_RDONLY)
= -1 ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/i686/sse2/cmov", 0xffffc864) = -1
ENOENT (No such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/i686/sse2/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/i686/sse2", 0xffffc864) = -1 ENOENT
(No such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/i686/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/i686/cmov", 0xffffc864) = -1 ENOENT
(No such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/i686/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/i686", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/sse2/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/sse2/cmov", 0xffffc864) = -1 ENOENT
(No such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/sse2/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/sse2", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls/cmov", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/tls/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/tls", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/amzi_7-0-11/lib/i686/sse2/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/i686/sse2/cmov", 0xffffc864) = -1 ENOENT
(No such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/i686/sse2/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/i686/sse2", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/i686/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/i686/cmov", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/i686/libXaw.so.7", O_RDONLY) = -1 ENOENT
(No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/i686", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/amzi_7-0-11/lib/sse2/cmov/libXaw.so.7", O_RDONLY) = -1
ENOENT (No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/sse2/cmov", 0xffffc864) = -1 ENOENT (No
such file or directory)
open("/home/nicholas/amzi_7-0-11/lib/sse2/libXaw.so.7", O_RDONLY) = -1 ENOENT
(No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/sse2", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/amzi_7-0-11/lib/cmov/libXaw.so.7", O_RDONLY) = -1 ENOENT
(No such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib/cmov", 0xffffc864) = -1 ENOENT (No such
file or directory)
open("/home/nicholas/amzi_7-0-11/lib/libXaw.so.7", O_RDONLY) = -1 ENOENT (No
such file or directory)
stat64("/home/nicholas/amzi_7-0-11/lib", 0xffffc864) = -1 ENOENT (No such file
or directory)
open("/etc/ld.so.cache", O_RDONLY)    = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=203895, ...}) = 0
mmap2(NULL, 203895, PROT_READ, MAP_PRIVATE, 3, 0) = 0x5556f000
close(3)                               = 0
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXaw.so.7", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@\320\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=371080, ...}) = 0
mmap2(NULL, 370800, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x555a1000
mmap2(0x555f5000, 28672, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x54) = 0x555f5000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libXmu.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXmu.so.6", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300I\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=89580, ...}) = 0
mmap2(NULL, 89356, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x555fc000
mmap2(0x55611000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15) = 0x55611000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libXt.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXt.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \276\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=324628, ...}) = 0
mmap2(NULL, 325240, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x55612000
mmap2(0x5565e000, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4c) = 0x5565e000
mmap2(0x55661000, 1656, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x55661000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libX11.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libX11.so.6", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\22\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=817248, ...}) = 0
mmap2(NULL, 817244, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x55662000
mmap2(0x55727000, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc5) = 0x55727000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libSM.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libSM.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0 \0\000"..., 512) =
512
fstat64(3, {st_mode=S_IFREG|0644, st_size=31808, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x5572a000
mmap2(NULL, 34840, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x5572b000
mmap2(0x55733000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0x55733000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libICE.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libICE.so.6", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\3006\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=86100, ...}) = 0
mmap2(NULL, 96400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x55734000
mmap2(0x55749000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14) = 0x55749000
mmap2(0x5574a000, 6288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x5574a000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libm.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`3\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=149264, ...}) = 0
mmap2(NULL, 151712, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x5574c000
mmap2(0x55770000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x23) = 0x55770000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file
or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260O\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1266832, ...}) = 0
mmap2(NULL, 1276892, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x55772000
mmap2(0x558a0000, 32768, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12d) = 0x558a0000
mmap2(0x558a8000, 7132, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x558a8000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libXext.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXext.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p&\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=53764, ...}) = 0
mmap2(NULL, 57020, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x558aa000
mmap2(0x558b7000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc) = 0x558b7000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libXpm.so.4", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXpm.so.4", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 #\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=84972, ...}) = 0
mmap2(NULL, 87904, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x558b8000
mmap2(0x558cd000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14) = 0x558cd000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libXau.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXau.so.6", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\n\0\000"..., 512) =
512
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x558ce000
fstat64(3, {st_mode=S_IFREG|0644, st_size=7300, ...}) = 0
mmap2(NULL, 10244, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x558cf000
mmap2(0x558d1000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x558d1000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libXdmcp.so.6", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXdmcp.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\16"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=16976, ...}) = 0
mmap2(NULL, 19956, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x558d2000
mmap2(0x558d5000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2) = 0x558d5000
close(3)                               = 0
open("/home/nicholas/Fresco/lib/libdl.so.2", O_RDONLY) = -1 ENOENT (No such file
or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/cmov/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\f\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=9592, ...}) = 0
mmap2(NULL, 12404, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x558d7000
mmap2(0x558d9000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x558d9000
close(3)                               = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x558db000
mprotect(0x558a0000, 20480, PROT_READ)  = 0
set_thread_area({entry_number:-1 -> 12, base_addr:0x558dba00, limit:1048575,
seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0,
useable:1}) = 0
munmap(0x5556f000, 203895)             = 0
brk(0)                               = 0x80c8000
brk(0x80e9000)                         = 0x80e9000
open("/etc/mtab", O_RDONLY)          = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=339, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x5556f000
read(3, "/dev/sda1 / ext3 rw,user_xattr 0"..., 4096) = 339
close(3)                               = 0
munmap(0x5556f000, 4096)             = 0
open("/proc/meminfo", O_RDONLY)       = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x5556f000
read(3, "MemTotal:    1028956 kB\nMemFre"..., 1024) = 604
close(3)                               = 0
munmap(0x5556f000, 4096)             = 0
uname({sys="Linux", node="calvin", ...}) = 0
socket(PF_FILE, SOCK_STREAM, 0)       = 3
uname({sys="Linux", node="calvin", ...}) = 0
uname({sys="Linux", node="calvin", ...}) = 0
connect(3, {sa_family=AF_FILE, path="/tmp/.X11-unix/X0"}, 19) = 0
uname({sys="Linux", node="calvin", ...}) = 0
fcntl64(3, F_SETFD, FD_CLOEXEC)       = 0
access("/home/nicholas/.Xauthority", R_OK) = 0
open("/home/nicholas/.Xauthority", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0600, st_size=169, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x5556f000
read(4, "\1\0\0\6calvin\0\00210\0\22MIT-MAGIC-COOKIE"..., 4096) = 169
read(4, "", 4096)                      = 0
close(4)                               = 0
munmap(0x5556f000, 4096)             = 0
writev(3, [{"l\0\v\0\0\0\22\0\20\0\0\0", 12}, {"MIT-MAGIC-COOKIE-1", 18},
{"\0\0", 2}, {"\f\1\7\334\346\260,\364\314\302\335\320fj\332\t", 16}], 4) = 48
fcntl64(3, F_GETFL)                   = 0x2 (flags O_RDWR)
fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK)  = 0
read(3, "\1\0\v\0\0\0\23\2", 8)       = 8
read(3, "\200\35,\4\0\0\300\2\377\377\37\0\0\1\0\0\24\0\377\377"..., 2124) =
2124
write(3, "7\0\5\0\0\0\300\0027\1\0\0\10\0\0\0\377\377\377\0b\0\5"..., 64) = 64
read(3, "\1\0\2\0\0\0\0\0\1\203\0\0\24\0\0\0\24\0\0\0\0\0\0\0\0"..., 32) = 32
read(3, "\1\10\3\0d\2\0\0\37\0\0\0\0\0\0\0\217\t\0\0\30\0\0\0\0"..., 32) = 32
readv(3, [{"*.Cursor:\tleft_ptr\n*Box.backgrou"..., 2447}, {"\0", 1}], 2) = 2448
write(3, "\203\0\1\0", 4)             = 4
read(3, "\1\0\4\0\0\0\0\0\377\377?\0\4\0\0\0\4\0\0\0(\0\0\0\0\0"..., 32) = 32
writev(3, [{"b\0\5\0\t\0\300\2", 8}, {"XKEYBOARD", 9}, {"\0\0\0", 3}], 3) = 20
read(3, "\1\0\5\0\0\0\0\0\1\227p\260\24\0\0\0\24\0\0\0(\0\0\0\0"..., 32) = 32
write(3, "\227\0\2\0\1\0\0\0", 8)    = 8
read(3, "\1\1\6\0\0\0\0\0\1\0\0\0\340\"K\10\3\0\0\0\10\0\0\0\1\0"..., 32) = 32
write(3, "\20\0\5\0\v\0\0\0Custom Init\0", 20) = 20
read(3, "\1\0\7\0\0\0\0\0]\1\0\0\0\0\0\0\24\0\0\0\24\0\0\0(\0\0"..., 32) = 32
write(3, "\20\0\5\0\v\0\0\0Custom Data\0", 20) = 20
read(3, "\1\0\10\0\0\0\0\0^\1\0\0\0\0\0\0\24\0\0\0\24\0\0\0(\0\0"..., 32) = 32
open("/usr/share/X11/locale/locale.alias", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=75128, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x5556f000
read(4, "#\t$XdotOrg: xc/nls/locale.alias,"..., 4096) = 4096
read(4, "4\t\t\t\tbr_FR.ISO8859-14\nbr_FR.ISO-"..., 4096) = 4096
read(4, "en.ISO-8859-1\t\t\t\t\ten_US.ISO8859-"..., 4096) = 4096
read(4, "-1\t\t\t\tes_ES.ISO8859-1\nes_ES.iso8"..., 4096) = 4096
read(4, "_CA.iso885915\t\t\t\tfr_CA.ISO8859-1"..., 4096) = 4096
read(4, "_IT.88591.en\t\t\t\t\tit_IT.ISO8859-1"..., 4096) = 4096
read(4, "9-15\nnl_BE.ISO-8859-15@euro\t\t\t\tn"..., 4096) = 4096
read(4, "T.UTF-8\nsk\t\t\t\t\t\tsk_SK.ISO8859-2\n"..., 4096) = 4096
read(4, "\t\t\twa_BE.ISO8859-1\nwa_BE\t\t\t\t\t\twa"..., 4096) = 4096
read(4, "us locale names\nISO8859-1\t\t\t\t\ten"..., 4096) = 4096
read(4, "_BG.koi8r:\t\t\t\t\tbg_BG.KOI8-R\nbe_B"..., 4096) = 4096
read(4, "TF-8\nGER_DE.8859:\t\t\t\t\tde_DE.ISO8"..., 4096) = 4096
read(4, "ISO-8859-1:\t\t\t\tes_CR.ISO8859-1\ne"..., 4096) = 4096
read(4, "F-8\nfr:\t\t\t\t\t\tfr_FR.ISO8859-1\nfr_"..., 4096) = 4096
read(4, "u_HU.ISO-8859-2:\t\t\t\thu_HU.ISO885"..., 4096) = 4096
read(4, "1\nmk_MK.MICROSOFT-CP1251:\t\t\t\tmk_"..., 4096) = 4096
read(4, "\nro_RO.utf8:\t\t\t\t\tro_RO.UTF-8\nru:"..., 4096) = 4096
read(4, "O8859-1\nts_ZA.utf8:\t\t\t\t\tts_ZA.UT"..., 4096) = 4096
read(4, "SO8859-8\nhrvatski:\t\t\t\t\thr_HR.ISO"..., 4096) = 1400
read(4, "", 4096)                      = 0
close(4)                               = 0
munmap(0x5556f000, 4096)             = 0
open("/usr/share/X11/locale/locale.dir", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=38035, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x5556f000
read(4, "#\t$XdotOrg: xc/nls/locale.dir,v "..., 4096) = 4096
read(4, "OCALE\t\t\tes_DO.ISO8859-1\niso8859-"..., 4096) = 4096
read(4, "ned for it, and the GNU C Librar"..., 4096) = 4096
read(4, "LE          byn_ER.UTF-8\nen_US"..., 4096) = 4096
read(4, "n Malawi), not Nynorsk.\n# See <U"..., 4096) = 4096
close(4)                               = 0
munmap(0x5556f000, 4096)             = 0
open("/usr/lib/X11/locale/locale.alias", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/usr/lib/X11/locale/locale.dir", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/usr/share/X11/locale/C/XI18N_OBJS", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=333, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x5556f000
read(4, "# CATEGORY(XLC|XIM|OM)\tSHARED_LI"..., 4096) = 333
read(4, "", 4096)                      = 0
close(4)                               = 0
munmap(0x5556f000, 4096)             = 0
open("/usr/lib/X11/locale/C/XI18N_OBJS", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/usr/share/X11/locale/common/xlcDef.so.2", O_RDONLY) = -1 ENOENT (No such
file or directory)
open("/usr/lib/X11/locale/common/xlcDef.so.2", O_RDONLY) = 4
read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\6\0"..., 512) = 512
fstat64(4, {st_mode=S_IFREG|0644, st_size=7276, ...}) = 0
mmap2(NULL, 10212, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) =
0x5556f000
mmap2(0x55571000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x1) = 0x55571000
close(4)                               = 0
open("/usr/share/X11/locale/locale.alias", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=75128, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x55572000
read(4, "#\t$XdotOrg: xc/nls/locale.alias,"..., 4096) = 4096
read(4, "4\t\t\t\tbr_FR.ISO8859-14\nbr_FR.ISO-"..., 4096) = 4096
read(4, "en.ISO-8859-1\t\t\t\t\ten_US.ISO8859-"..., 4096) = 4096
read(4, "-1\t\t\t\tes_ES.ISO8859-1\nes_ES.iso8"..., 4096) = 4096
read(4, "_CA.iso885915\t\t\t\tfr_CA.ISO8859-1"..., 4096) = 4096
read(4, "_IT.88591.en\t\t\t\t\tit_IT.ISO8859-1"..., 4096) = 4096
read(4, "9-15\nnl_BE.ISO-8859-15@euro\t\t\t\tn"..., 4096) = 4096
read(4, "T.UTF-8\nsk\t\t\t\t\t\tsk_SK.ISO8859-2\n"..., 4096) = 4096
read(4, "\t\t\twa_BE.ISO8859-1\nwa_BE\t\t\t\t\t\twa"..., 4096) = 4096
read(4, "us locale names\nISO8859-1\t\t\t\t\ten"..., 4096) = 4096
read(4, "_BG.koi8r:\t\t\t\t\tbg_BG.KOI8-R\nbe_B"..., 4096) = 4096
read(4, "TF-8\nGER_DE.8859:\t\t\t\t\tde_DE.ISO8"..., 4096) = 4096
read(4, "ISO-8859-1:\t\t\t\tes_CR.ISO8859-1\ne"..., 4096) = 4096
read(4, "F-8\nfr:\t\t\t\t\t\tfr_FR.ISO8859-1\nfr_"..., 4096) = 4096
read(4, "u_HU.ISO-8859-2:\t\t\t\thu_HU.ISO885"..., 4096) = 4096
read(4, "1\nmk_MK.MICROSOFT-CP1251:\t\t\t\tmk_"..., 4096) = 4096
read(4, "\nro_RO.utf8:\t\t\t\t\tro_RO.UTF-8\nru:"..., 4096) = 4096
read(4, "O8859-1\nts_ZA.utf8:\t\t\t\t\tts_ZA.UT"..., 4096) = 4096
read(4, "SO8859-8\nhrvatski:\t\t\t\t\thr_HR.ISO"..., 4096) = 1400
read(4, "", 4096)                      = 0
close(4)                               = 0
munmap(0x55572000, 4096)             = 0
open("/usr/share/X11/locale/locale.dir", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=38035, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x55572000
read(4, "#\t$XdotOrg: xc/nls/locale.dir,v "..., 4096) = 4096
read(4, "OCALE\t\t\tes_DO.ISO8859-1\niso8859-"..., 4096) = 4096
read(4, "ned for it, and the GNU C Librar"..., 4096) = 4096
read(4, "LE          byn_ER.UTF-8\nen_US"..., 4096) = 4096
read(4, "n Malawi), not Nynorsk.\n# See <U"..., 4096) = 4096
close(4)                               = 0
munmap(0x55572000, 4096)             = 0
access("/usr/share/X11/locale/C/XLC_LOCALE", R_OK) = 0
open("/usr/share/X11/locale/C/XLC_LOCALE", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=772, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x55572000
read(4, "#  $Xorg: C,v 1.3 2000/08/17 19:"..., 4096) = 772
read(4, "", 4096)                      = 0
close(4)                               = 0
munmap(0x55572000, 4096)             = 0
write(3, "\20\1\6\0\20\0\0\0SCREEN_RESOURCES", 24) = 24
read(3, "\1\0\t\0\0\0\0\0\0\0\0\0\0\0\0\0\30\0\0\0\30\0\0\0(\0\0"..., 32) = 32
uname({sys="Linux", node="calvin", ...}) = 0
open("/home/nicholas/.Xdefaults-calvin", O_RDONLY) = -1 ENOENT (No such file or
directory)
access("/home/nicholas/C/Xedit-color", R_OK) = -1 ENOENT (No such file or
directory)
access("/home/nicholas/Xedit-color", R_OK) = -1 ENOENT (No such file or
directory)
access("/home/nicholas/C/Xedit", R_OK)  = -1 ENOENT (No such file or directory)
access("/home/nicholas/Xedit", R_OK) = -1 ENOENT (No such file or directory)
access("/usr/lib/X11/C/app-defaults/Xedit", R_OK) = -1 ENOENT (No such file or
directory)
access("/usr/lib/X11/app-defaults/Xedit", R_OK) = -1 ENOENT (No such file or
directory)
access("/etc/X11/C/app-defaults/Xedit", R_OK) = -1 ENOENT (No such file or
directory)
access("/etc/X11/app-defaults/Xedit", R_OK) = 0
stat64("/etc/X11/app-defaults/Xedit", {st_mode=S_IFREG|0644, st_size=15448,
...}) = 0
open("/etc/X11/app-defaults/Xedit", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=15448, ...}) = 0
read(4, "! $XFree86: xc/programs/xedit/Xe"..., 15448) = 15448
close(4)                               = 0
write(3, "\20\1\t\0\33\0\0\0XDCCC_LINEAR_RGB_CORRECT"..., 36) = 36
read(3, "\1\0\n\0\0\0\0\0\0\0\0\0\0\0\0\0$\0\0\0$\0\0\0(\0\0\0\0"..., 32) = 32
write(3, "\20\1\t\0\31\0\0\0XDCCC_LINEAR_RGB_MATRICE"..., 36) = 36
read(3, "\1\0\v\0\0\0\0\0\0\0\0\0\0\0\0\0$\0\0\0$\0\0\0(\0\0\0\0"..., 32) = 32
write(3, "T\1\4\0 \0\0\0\307\307\307\307\307\307LI", 16) = 16
read(3, "\1\0\f\0\0\0\0\0\307\307\307\307\307\307\0\0\307\307\307"..., 32) = 32
open("/home/nicholas/Fresco/lib/libXcursor.so.1", O_RDONLY) = -1 ENOENT (No such
file or directory)
open("/etc/ld.so.cache", O_RDONLY)    = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=203895, ...}) = 0
mmap2(NULL, 203895, PROT_READ, MAP_PRIVATE, 4, 0) = 0x558dc000
close(4)                               = 0
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXcursor.so.1", O_RDONLY) = 4
read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\"\0"..., 512) = 512
fstat64(4, {st_mode=S_IFREG|0644, st_size=33636, ...}) = 0
mmap2(NULL, 36584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) =
0x55572000
mmap2(0x5557a000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x7) = 0x5557a000
close(4)                               = 0
open("/home/nicholas/Fresco/lib/libXrender.so.1", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXrender.so.1", O_RDONLY) = 4
read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\23"..., 512) = 512
fstat64(4, {st_mode=S_IFREG|0644, st_size=30500, ...}) = 0
mmap2(NULL, 29352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) =
0x5557b000
mmap2(0x55582000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x7) = 0x55582000
close(4)                               = 0
open("/home/nicholas/Fresco/lib/libXfixes.so.3", O_RDONLY) = -1 ENOENT (No such
file or directory)
access("/etc/ld.so.nohwcap", F_OK)    = -1 ENOENT (No such file or directory)
open("/usr/lib/libXfixes.so.3", O_RDONLY) = 4
read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0000\17\0"..., 512) = 512
fstat64(4, {st_mode=S_IFREG|0644, st_size=14252, ...}) = 0
mmap2(NULL, 17244, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) =
0x55583000
mmap2(0x55587000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x3) = 0x55587000
close(4)                               = 0
munmap(0x558dc000, 203895)             = 0
writev(3, [{"-\1\5\0\1\0\300\2\6\0\307\307cursorARbR\4\0\6\0AT", 28}, {"RENDER",
6}, {"\0\0", 2}], 3) = 36
read(3, "\1\0\16\0\0\0\0\0\1\234\0\265\20\0\0\0\20\0\0\0\0\0\0\0"..., 32) = 32
write(3, "\234\0\3\0\0\0\0\0\n\0\0\0\234\1\1\0", 16) = 16
read(3, "\1#\17\0\0\0\0\0\0\0\0\0\n\0\0\0\20\0\0\0\1\0\0\0\0\0\0"..., 32) = 32
read(3, "\1[\20\0K\1\0\0\26\0\0\0\1\0\0\0\7\0\0\0P\0\0\0\1\0\0\0"..., 32) = 32
read(3, "\374\0\0\0\1\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0"..., 1324) =
1324
open("/home/nicholas/.icons/Industrial/cursors/left_ptr", O_RDONLY) = -1 ENOENT
(No such file or directory)
open("/home/nicholas/.icons/Industrial/index.theme", O_RDONLY) = -1 ENOENT (No
such file or directory)
open("/usr/share/icons/Industrial/cursors/left_ptr", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=2368, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0x1000) =
0x55588000
read(4, "Xcur\20\0\0\0\0\0\1\0\1\0\0\0\2\0\375\377\30\0\0\0\34\0"..., 4096) =
2368
_llseek(4, 0, [0], SEEK_SET)          = 0
read(4, "Xcur\20\0\0\0\0\0\1\0\1\0\0\0\2\0\375\377\30\0\0\0\34\0"..., 4096) =
2368
close(4)                               = 0
munmap(0x55588000, 4096)             = 0
writev(3, [{"5 \4\0\2\0\300\0027\1\0\0\30\0\30\0007r\4\0\3\0\300\2\2"..., 2428},
{"XFIXES", 6}, {"\0\0", 2}], 3) = 2436
read(3, "\1\0\31\0\0\0\0\0\1\232r\264\20\0\0\0\20\0\0\0\0\0\0\0"..., 32) = 32
write(3, "\232\0\3\0\4\0\0\0\0\0\0\0", 12) = 12
read(3, "\1\23\32\0\0\0\0\0\4\0\0\0\0\0\0\0\10#\36\10\0\0\0\0\340"..., 32) = 32
stat64("/usr/lib/X11/Xcms.txt", 0xffff6e2c) = -1 ENOENT (No such file or
directory)
writev(3, [{"\232\27\5\0\5\0\300\2\10\0\0\0left_ptr7\0\4\0\6\0\300\002"..., 96},
{"gray", 4}], 2) = 100
read(3, "\0\1\33\0\3\0\300\2\27\0\232\10\24\0\0\0(\0\0\0\250\303"..., 32) = 32
open("/usr/share/X11/XErrorDB", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=37893, ...}) = 0
brk(0x8111000)                         = 0x8111000
read(4, "! $Xorg: XErrorDB,v 1.3 2000/08/"..., 37893) = 37893
close(4)                               = 0
write(2, "X Error of failed request:  BadR"..., 85) = 85
write(2, "Major opcode of failed request: "..., 36) = 36
write(2, " (XFIXES)\n", 10)          = 10
write(2, "  ", 2)                      = 2
write(2, "Minor opcode of failed request: "..., 35) = 35
write(2, " (XFixesSetCursorName)", 22)  = 22
write(2, "\n", 1)                      = 1
write(2, "  ", 2)                      = 2
write(2, "Serial number of failed request:"..., 36) = 36
write(2, "\n  ", 3)                   = 3
write(2, "Current serial number in output "..., 43) = 43
write(2, "\n", 1)                      = 1
exit_group(1)                         = ?

Bug reassigned from package `libxfixes3' to `gtk-engines-industrial'. Request
was from David Nusinow <david_nusinow@verizon.net> to control@bugs.debian.org.
Full text and rfc822 format available.
Bug reassigned from package `gtk-engines-industrial' to
`gtk2-engines-industrial'. Request was from Nick Lewycky <nicholas@mxc.ca> to
control@bugs.debian.org. Full text and rfc822 format available.
Information forwarded to debian-bugs-dist@lists.debian.org, Josselin Mouette
<joss@debian.org>:
Bug#362049; Package gtk2-engines-industrial. Full text and rfc822 format
available.
Acknowledgement sent to Sven Hartge <sven@svenhartge.de>:
Extra info received and forwarded to list. Copy sent to Josselin Mouette
<joss@debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: Sven Hartge <sven@svenhartge.de>
To: 362049@bugs.debian.org
Cc: David Nusinow <david_nusinow@verizon.net>
Subject: Re: Bug#362049: libxfixes3: XFixesSetCursorName (no such operation)
Date: Wed, 12 Apr 2006 11:44:48 +0200 (CEST)

Hi.

I don't think this to be a bug of gtk-engines-industrial, because the same
error occurs, if you for example use the "whiteglass" theme, which is a
part of xlibs-data.

The original submitter "fixed" this by removing gtk-engines-industrial,
because then the same thing happens as with my changes to the gconf-tree:
Gnome falls back to the default builtin cursor theme, which works without
problems.

So to me this indeed looks like a bug somewhere inside X.

Grü?e,
S°

--
Sven Hartge -- professioneller Unix-Geek
Meine Gedanken im Netz: http://www.svenhartge.de/

Achtung, neue Mail-Adresse: sven@svenhartge.de

Information forwarded to debian-bugs-dist@lists.debian.org, Josselin Mouette
<joss@debian.org>:
Bug#362049; Package gtk2-engines-industrial. Full text and rfc822 format
available.
Acknowledgement sent to Silvestre Zabala <silvestre@zabala.name>:
Extra info received and forwarded to list. Copy sent to Josselin Mouette
<joss@debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: Silvestre Zabala <silvestre@zabala.name>
To: 362049@bugs.debian.org
Subject: Seems to be an XFIXES problem
Date: Wed, 12 Apr 2006 13:04:29 +0200

[Message part 1 (text/plain, inline)]

Hello,

when I start the xcompmgr I get several errors like

"error 1 request 154 minor 5
error 1 request 154 minor 10
error 1 request 154 minor 12
error 1 request 154 minor 13
error 1 request 154 minor 17
error 1 request 154 minor 22"
(cut, sorted and uniq)

all related to Region operations in XFIXES. Of course xcompmgr doesn't
work.

Best regards,
  Silvestre

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-1-k7
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages xcompmgr depends on:
ii  libc6                      2.3.6-6    GNU C Library: Shared libraries
ii  libx11-6                   2:1.0.0-5 X11 client-side library
ii  libxcomposite1             1:0.2.2.2-2 X11 Composite extension library
ii  libxdamage1                1:1.0.2.2-2 X11 damaged region extension libra
ii  libxfixes3                1:3.0.1.2-2 X11 miscellaneous 'fixes' extensio
ii  libxrender1                1:0.9.0.2-2 X Rendering Extension client libra

xcompmgr recommends no packages.

-- no debconf information

[signature.asc (application/pgp-signature, inline)]

Bug reassigned from package `gtk2-engines-industrial' to `libxfixes3'. Request
was from Silvestre Zabala <silvestre@zabala.name> to control@bugs.debian.org.
Full text and rfc822 format available.
Information forwarded to debian-bugs-dist@lists.debian.org, Debian X Strike
Force <debian-x@lists.debian.org>:
Bug#362049; Package libxfixes3. Full text and rfc822 format available.
Acknowledgement sent to Silvestre Zabala <silvestre@zabala.name>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force
<debian-x@lists.debian.org>. Full text and rfc822 format available.

Message received at 362049@bugs.debian.org (full text, mbox):

From: Silvestre Zabala <silvestre@zabala.name>
To: Michel D?nzer <daenzer@debian.org>,
362049@bugs.debian.org
Cc: Debian X Strike Force <debian-x@lists.debian.org>
Subject: Re: Processed: reassign 362049 to libxfixes3
Date: Wed, 12 Apr 2006 14:17:44 +0200

[Message part 1 (text/plain, inline)]

* Michel D?nzer <daenzer@debian.org> [2006-04-12 13:57]:

> I think the problem is more likely in the X server. Downgrading
> libxfixes3 or xserver-xorg to 6.9.0.dfsg.1-6 should tell.

As already discussed on #debian-x, rebuilding libxfixes3 fixes the bug.

Best regards,
  Silvestre

--
http://silvestre.zabala.name/

[signature.asc (application/pgp-signature, inline)]

Send a report that this bug log contains spam.
Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified:
Wed, 12 Apr 2006 16:03:07 UTC

Debian Bug tracking system
copyright 1999 Darren O. Benham, 1997, 2003 nCipher Corporation Ltd, 1994

【在 pluskid (pluskid) 的大作中提到: 】
: 好像有些gtk程序不能用了，连emacs-snapshot-gtk都起不来了。
: 【在 sishen (狠一点! 不再颓废!) 的大作中提到: 】
: : 还好我一直对这些没要求...

--

高鍾梅江賈席杜項熊談計米祁姚和顧伍皮樂郝滕雷費酆俞苗魯奚雲柏戚金孔何朱蔣馮周趙
夏徐盛童路季阮祝紀宋伏貝毛邵穆孟余卞于鄔殷賀廉鮑任鳳韋范蘇水謝魏曹呂秦沈陳吳錢
蔡邱林顏婁麻蘭董舒茅成明禹湛蕭平元齊時安羅倪岑史袁花昌彭潘竇鄒陶嚴施尤韓褚鄭孫
田駱刁郭危強閔梁屈龐戴臧狄汪尹黃卜康傅常畢湯薛唐柳方馬郎葛章喻姜華張許楊衛王李

※ 内容修改:·dlzcn 于 Apr 13 00:08:55 修改本文内容·[FROM: dlzcn]
※ 来源:·飘渺水云间 freecity.cn·[FROM: dlzcn]

		自动登录	找回密码
密码			注册