LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1110|回复: 10

为什么没次我安装总是不能启动啊

[复制链接]
发表于 2003-11-20 10:26:19 | 显示全部楼层 |阅读模式
slackware是我用过的linux系统中感觉最快第一个 可是 无法启动 grub lilo昨天忙了一天也没弄好 哎。。。我为linux准备的15g空间 格了n次了
最主要的是 启动了显示一堆错误 ismod...看不懂啦 一屏幕
我想问一下 这个是不是要重新编译内核阿
要是要编译内核 恐怕我就不能享受飞快slackware了
发表于 2003-11-20 11:55:39 | 显示全部楼层
出错提示是什么啊?
 楼主| 发表于 2003-11-21 12:49:56 | 显示全部楼层
再那里看启动日志啊 一屏幕的错误 我没发写
发表于 2003-11-21 13:33:44 | 显示全部楼层
用dmesg。
 楼主| 发表于 2003-11-24 18:42:19 | 显示全部楼层
先 谢谢版主
经过努力 我还是没装好输入发 我不忍心 但是还是放弃了
毕竟我是菜鸟 很多东西都不只道 我想这个版本不适合
等熟悉了在是一次 呵呵 我把2张光盘收起来了
我发现在redhat mdk 都有这个毛病 每次检测新硬件就现实很多错误 我现在在mdk下
Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
BIOS-e820: 000000000f800000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
247MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000f4ac0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 GBT                                       ) @ 0x000f65a0
ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0f7f3000
ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0f7f3040
ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0f7f6940
ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] polarity[0x0] trigger[0x0] lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat.       Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=307 devfs=mount hdc=ide-scsi acpi=ht resume=/dev/hda8
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1716.935 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 247172k/253888k available (1508k kernel code, 6328k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-6, 2-9, 2-11, 2-20, 2-21 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 00000000
.......     : arbitration: 00
.... register #03: 00000001
.......     : Boot DT    : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00  1    0    0   0   0    0    0    00
01 001 01  0    0    0   0   0    1    1    39
02 001 01  0    0    0   0   0    1    1    31
03 001 01  0    0    0   0   0    1    1    41
04 001 01  0    0    0   0   0    1    1    49
05 000 00  1    0    0   0   0    0    0    00
06 000 00  1    0    0   0   0    0    0    00
07 001 01  0    0    0   0   0    1    1    51
08 001 01  0    0    0   0   0    1    1    59
09 000 00  1    0    0   0   0    0    0    00
0a 001 01  0    0    0   0   0    1    1    61
0b 000 00  1    0    0   0   0    0    0    00
0c 001 01  0    0    0   0   0    1    1    69
0d 001 01  0    0    0   0   0    1    1    71
0e 001 01  0    0    0   0   0    1    1    79
0f 001 01  0    0    0   0   0    1    1    81
10 001 01  1    1    0   1   0    1    1    89
11 001 01  1    1    0   1   0    1    1    91
12 001 01  1    1    0   1   0    1    1    99
13 001 01  1    1    0   1   0    1    1    A1
14 000 00  1    0    0   0   0    0    0    00
15 000 00  1    0    0   0   0    0    0    00
16 001 01  1    1    0   1   0    1    1    A9
17 001 01  1    1    0   1   0    1    1    B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1716.9510 MHz.
..... host bus clock speed is 100.9969 MHz.
cpu: 0, clocks: 1009969, slice: 504984
CPU0<T0:1009968,T1:504976,D:8,S:504984,C:1009969>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf9d80, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE
发表于 2003-11-27 13:49:42 | 显示全部楼层
没看到有错啊。。。
发表于 2003-11-27 14:43:09 | 显示全部楼层
试试禁止hotplug,这么做:
root身份, chmod a-x /etc/rc.d/rc.hotplug
然后 reboot
 楼主| 发表于 2003-11-27 15:15:24 | 显示全部楼层
先庆祝一下
我仔细研究了一下grub的资料 重新安装可以用grub启动了
现在又发现一个问题 启动kde后退出 就黑屏
我把redhat以前的XF86备份文件复制过来 发现不能启动 估计是字体路径没设对。 请问显卡驱动 是哪几个文件控制阿?是不是只有这一个XF86..阿 我看了/etx/X11/下面有好几个类似的文件 一头雾水阿。 ----------------
我先去踢球拉, 一会再来
发表于 2003-11-28 17:10:03 | 显示全部楼层
最初由 bluemx 发表

现在又发现一个问题 启动kde后退出 就黑屏
我把redhat以前的XF86备份文件复制过来 发现不能启动 估计是字体路径没设对。 请问显卡驱动 是哪几个文件控制阿?是不是只有这一个XF86..阿 我看了/etx/X11/下面有好几个类似的文件 一头雾水阿。  


X Window的配置文件就是XF86Config,配置方法请看置顶的常见问题一帖。
 楼主| 发表于 2003-12-10 13:16:57 | 显示全部楼层
Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:43:01 PDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
BIOS-e820: 000000000f800000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
247MB LOWMEM available.
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=my ro root=301 my
Initializing CPU#0
Detected 1716.958 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 247940k/253888k available (1813k kernel code, 5560k reserved, 614k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf9d80, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd8000000, mapped to 0xd000d000, size 600k
vesafb: mode is 640x480x8, linelength=640, pages=25
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:02.0
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hdaMA, hdbMA
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdcMA, hdd:pio
hda: ST360021A, ATA DISK drive
hdb: Maxtor 4D040H2, ATA DISK drive
blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03a9ebc, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG CDRW/DVD SM-316B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 < hda5 > hda3
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  1982.400 MB/sec
   32regs    :  1248.000 MB/sec
   pIII_sse  :  2246.800 MB/sec
   pII_mmx   :  1964.400 MB/sec
   p5_mmx    :  1955.200 MB/sec
raid5: using function: pIII_sse (2246.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,1)) ...
for (ide0(3,1))
ide0(3,1):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
Adding Swap: 1212868k swap-space (priority -1)
MSDOS FS: IO charset gb2312
MSDOS FS: IO charset gb2312
MSDOS FS: IO charset gb2312
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected an Intel(R) 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 11 for device 01:02.0
eth0: RealTek RTL-8029 found at 0xa000, IRQ 11, 00:00:E8:A32:F2.
PCI: Found IRQ 9 for device 00:1f.5
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0: clocking to 48000
i810_rng: RNG not detected
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 00:1d.7: irq 6, pci mem d030a000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 16.
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0xb800, IRQ 5
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0xb000, IRQ 5
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0xb400, IRQ 11
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i810_rng: RNG not detected
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 5 for device 00:02.0
PCI: Sharing IRQ 5 with 00:1f.1
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e1000000-e107ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
cdrom: This disc doesn't have any tracks I recognize!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表