Mplayer播放HD-RIP片子，说影像太大了，有啥办法么？

bigcat00 · 发表于 2007-4-28 18:12:04

RIP文件是MKV格式的，播放信息如下：

bigcat@bigcat:~/foreign_home/downloading/07.04.26.Tears.of.the.sun.2003.BDRe.x264.AC3.DualAudio-CSCXK@Silu$ mplayer Tears.of.the.sun.2003.BDRe.x264.AC3.DualAudio-CSCXK@Silu-Sample.mkv
MPlayer 2:0.99+1.0pre8-0ubuntu8 (C) 2000-2006 MPlayer Team
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Model: 8, Stepping: 10)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing Tears.of.the.sun.2003.BDRe.x264.AC3.DualAudio-CSCXK@Silu-Sample.mkv.
Cache fill: 0.00% (0 bytes)
[mkv] Track ID 1: video (V_MPEG4/ISO/AVC), -vid 0
[mkv] Track ID 2: audio (A_AC3), -aid 0, -alang eng
[mkv] Track ID 3: audio (A_AC3), -aid 1, -alang chi
[mkv] Will play video track 1
[mkv] Will play audio track 2
Matroska file format detected.
VIDEO: [avc1] 1280x800 24bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 448.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
xscreensaver_disable: Could not find XScreenSaver window.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
alsa-init: using device default
alsa: 48000 Hz/2 channels/4 bpf/32768 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 1280 x 800 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2.40:1 - prescaling to correct movie aspect.
VO: [xv] 1280x800 => 1920x800 Planar YV12
[xv] Source image dimensions are too high: 1280x800 (maximum is 1024x1024)
FATAL: Cannot initialize video driver.
FATAL: Could not initialize video filters (-vf) or video output (-vo).
alsa-uninit: pcm closed
Exiting... (End of file)

复制代码

尝试了-zoom、-x 1024 -y 480等参数，结果还是一样。用-vo x11倒是可以出影像，可是太慢了。兄弟们有办法治它么？

Conanzsw · 发表于 2007-4-29 21:16:26

mplayer -vo xv -vf scale=x:y

bigcat00 · 发表于 2007-4-30 10:14:11

能行了，多谢兄弟的回复，感谢感谢！！！

bigcat00 · 发表于 2007-5-2 14:06:42

有个问题：使用-vf scale参数是可以播放，但是CPU占用也大幅度上升，起码多了20%左右。还有其它代价低些的办法没有？

高热 · 发表于 2007-5-2 17:09:13

缩放必然会使cpu占用率增大。另外，你是怎么知道cpu占用率大了20%的？
建议看看mplayer文档中的这些参数的说明：

−sws <software scaler type> (also see −vf scale and −zoom)

Specify the software scaler algorithm to be used with the −zoom option. This affects video output drivers which lack hardware acceleration, e.g. x11.

Available types are:

0

fast bilinear

1

bilinear

2

bicubic (good quality) (default)

3

experimental

4

nearest neighbor (bad quality)

5

area

6

luma bicubic / chroma bilinear

7

gauss

8

sincR

9

lanczos

10

natural bicubic spline

NOTE: Some −sws options are tunable. The description of the scale video filter has further information.

scale[=w:h[:ilaced[:chr_drop[:par[:par2[:presize[:noup[:arnd]]]]]]]]

Scales the image with the software scaler (slow) and performs a YUV<−>RGB colorspace conversion (also see −sws).

<w>,<h>

scaled width/height (default: original width/height)
NOTE: If −zoom is used, and underlying filters (including libvo) are incapable of scaling, it defaults to d_width/d_height!

0: scaled d_width/d_height
-1: original width/height
-2: Calculate w/h using the other dimension and the prescaled aspect ratio.
-3: Calculate w/h using the other dimension and the original aspect ratio.
-(n+8): Like -n above, but rounding the dimension to the closest multiple of 16.

<ilaced>

Toggle interlaced scaling.

0: off (default)
1: on

<chr_drop>

chroma skipping

0: Use all available input lines for chroma.
1: Use only every 2. input line for chroma.
2: Use only every 4. input line for chroma.
3: Use only every 8. input line for chroma.

<par>[:<par2>] (also see −sws)

Set some scaling parameters depending on the type of scaler selected with −sws.

−sws 2 (bicubic): B (blurring) and C (ringing)
0.00:0.60 default
0.00:0.75 VirtualDub’s "precise bicubic"
0.00:0.50 Catmull-Rom spline
0.33:0.33 Mitchell-Netravali spline
1.00:0.00 cubic B-spline
−sws 7 (gaussian): sharpness (0 (soft) − 100 (sharp))
−sws 9 (lanczos): filter length (1−10)

<presize>

Scale to preset sizes.

qntsc: 352x240 (NTSC quarter screen)
qpal: 352x288 (PAL quarter screen)
ntsc: 720x480 (standard NTSC)
pal: 720x576 (standard PAL)
sntsc: 640x480 (square pixel NTSC)
spal: 768x576 (square pixel PAL)

<noup>

Disallow upscaling past the original dimensions.

0: Allow upscaling (default).
1: Disallow upscaling if one dimension exceeds its original value.
2: Disallow upscaling if both dimensions exceed their original values.

<arnd>

Accurate rounding for the vertical scaler, which may be faster or slower than the default rounding.

0: Disable accurate rounding (default).
1: Enable accurate rounding.

		自动登录	找回密码
密码			注册