LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1725|回复: 15

一台很老的机子装桌面系统,不知道显卡怎么办?

[复制链接]
发表于 2006-9-27 12:46:28 | 显示全部楼层 |阅读模式
RT
大家帮帮忙,系统装好了,随便配了个显卡,图形界面显示不出来!

有什么办法没有,是集成的显卡
发表于 2006-9-27 13:09:54 | 显示全部楼层
回复 支持 反对

使用道具 举报

发表于 2006-9-27 13:11:43 | 显示全部楼层
try lspci
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-27 13:47:03 | 显示全部楼层
lspci是这个
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 20)
0000:00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
0000:00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 81)
0000:00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
0000:00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
0000:00:0d.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 20)
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-27 13:50:08 | 显示全部楼层
那个包是什么用的?
回复 支持 反对

使用道具 举报

发表于 2006-9-27 13:51:24 | 显示全部楼层
VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 20)

这就是你显卡。sis630

这不是很老的机器,我以为是486呢。
sis630可以驱动的。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-27 13:52:46 | 显示全部楼层
可是默认的那边选SIS,怎么用startx启动不了呢?
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-27 13:54:20 | 显示全部楼层
dpkg-reconfigure xserver-xfree86,我用这个,第一步选了SIS,可是好像不行啊
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-27 13:59:27 | 显示全部楼层
[1] -1  0       0xdd102000 - 0xdd102fff (0x1000) MX
        [2] -1  0       0xdd101000 - 0xdd101fff (0x1000) MX
        [3] -1  0       0xd8000000 - 0xd7ffffff (0x0) MXO
        [4] -1  0       0xdd000000 - 0xdd01ffff (0x20000) MX(B)
        [5] -1  0       0xd0000000 - 0xd7ffffff (0x8000000) MX(B)
        [6] -1  0       0x0000ec00 - 0x0000ec3f (0x40) IX
        [7] -1  0       0x0000e800 - 0x0000e8ff (0x100) IX
        [8] -1  0       0x0000e400 - 0x0000e41f (0x20) IX
        [9] -1  0       0x0000e000 - 0x0000e0ff (0x100) IX
        [10] -1 0       0x00004000 - 0x0000400f (0x10) IX
        [11] -1 0       0x0000d000 - 0x0000d07f (0x80) IX(B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xdd100000 - 0xdd100fff (0x1000) MX
        [1] -1  0       0xdd102000 - 0xdd102fff (0x1000) MX
        [2] -1  0       0xdd101000 - 0xdd101fff (0x1000) MX
        [3] -1  0       0xd8000000 - 0xd7ffffff (0x0) MXO
        [4] -1  0       0xdd000000 - 0xdd01ffff (0x20000) MX(B)
        [5] -1  0       0xd0000000 - 0xd7ffffff (0x8000000) MX(B)
        [6] -1  0       0x0000ec00 - 0x0000ec3f (0x40) IX
        [7] -1  0       0x0000e800 - 0x0000e8ff (0x100) IX
        [8] -1  0       0x0000e400 - 0x0000e41f (0x20) IX
        [9] -1  0       0x0000e000 - 0x0000e0ff (0x100) IX
        [10] -1 0       0x00004000 - 0x0000400f (0x10) IX
        [11] -1 0       0x0000d000 - 0x0000d07f (0x80) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1  0       0x0000ffff - 0x0000ffff (0x1) IX
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1  0       0xdd100000 - 0xdd100fff (0x1000) MX
        [6] -1  0       0xdd102000 - 0xdd102fff (0x1000) MX
        [7] -1  0       0xdd101000 - 0xdd101fff (0x1000) MX
        [8] -1  0       0xd8000000 - 0xd7ffffff (0x0) MXO
        [9] -1  0       0xdd000000 - 0xdd01ffff (0x20000) MX(B)
        [10] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX(B)
        [11] -1 0       0x0000ffff - 0x0000ffff (0x1) IX
        [12] -1 0       0x00000000 - 0x000000ff (0x100) IX
        [13] -1 0       0x0000ec00 - 0x0000ec3f (0x40) IX
        [14] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX
        [15] -1 0       0x0000e400 - 0x0000e41f (0x20) IX
        [16] -1 0       0x0000e000 - 0x0000e0ff (0x100) IX
        [17] -1 0       0x00004000 - 0x0000400f (0x10) IX
        [18] -1 0       0x0000d000 - 0x0000d07f (0x80) IX(B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 2.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.13.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.1
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.7.0
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.4
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
        SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
        SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre),
        SIS660/661FX/M661FX/M661MX/741/741GX/M741/760/M760, SIS340
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS630/730 found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1  0       0xdd100000 - 0xdd100fff (0x1000) MX
        [6] -1  0       0xdd102000 - 0xdd102fff (0x1000) MX
        [7] -1  0       0xdd101000 - 0xdd101fff (0x1000) MX
        [8] -1  0       0xd8000000 - 0xd7ffffff (0x0) MXO
        [9] -1  0       0xdd000000 - 0xdd01ffff (0x20000) MX(B)
        [10] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX(B)
        [11] -1 0       0x0000ffff - 0x0000ffff (0x1) IX
        [12] -1 0       0x00000000 - 0x000000ff (0x100) IX
        [13] -1 0       0x0000ec00 - 0x0000ec3f (0x40) IX
        [14] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX
        [15] -1 0       0x0000e400 - 0x0000e41f (0x20) IX
        [16] -1 0       0x0000e000 - 0x0000e0ff (0x100) IX
        [17] -1 0       0x00004000 - 0x0000400f (0x10) IX
        [18] -1 0       0x0000d000 - 0x0000d07f (0x80) IX(B)
(II) resource ranges after probing:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1  0       0xdd100000 - 0xdd100fff (0x1000) MX
        [6] -1  0       0xdd102000 - 0xdd102fff (0x1000) MX
        [7] -1  0       0xdd101000 - 0xdd101fff (0x1000) MX
        [8] -1  0       0xd8000000 - 0xd7ffffff (0x0) MXO
        [9] -1  0       0xdd000000 - 0xdd01ffff (0x20000) MX(B)
        [10] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX(B)
        [11] 0  0       0x000a0000 - 0x000affff (0x10000) MS
        [12] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS
        [13] 0  0       0x000b8000 - 0x000bffff (0x8000) MS
        [14] -1 0       0x0000ffff - 0x0000ffff (0x1) IX
        [15] -1 0       0x00000000 - 0x000000ff (0x100) IX
        [16] -1 0       0x0000ec00 - 0x0000ec3f (0x40) IX
        [17] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX
        [18] -1 0       0x0000e400 - 0x0000e41f (0x20) IX
        [19] -1 0       0x0000e000 - 0x0000e0ff (0x100) IX
        [20] -1 0       0x00004000 - 0x0000400f (0x10) IX
        [21] -1 0       0x0000d000 - 0x0000d07f (0x80) IX(B)
        [22] 0  0       0x000003b0 - 0x000003bb (0xc) IS
        [23] 0  0       0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) SIS(0): SiS driver (2004/08/20-1)
(II) SIS(0): Copyright (C) 2001-2004 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): Compiled for XFree86 version 4.3.0.1
(II) SIS(0): See http://www.winischhofer.net/linuxsisvga.shtml for documentation and updates
(--) SIS(0): This adapter is primary display adapter
(WW) System lacks support for changing MTRRs
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->IOOffset is 0xcc80
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated IO registers at 0xD000
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SIS(0): Video BIOS version "1.07.54" found (old data layout)
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is disabled
(==) SIS(0): TurboQueue enabled
(II) SIS(0): Hotkey display switching is disabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0):    whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(==) SIS(0): DRI enabled
(--) SIS(0): Shared Memory Area is on DIMM1
(--) SIS(0): DRAM type: SDR SDRAM
(--) SIS(0): Memory clock: 100.226 MHz
(--) SIS(0): (Adapter assumes MCLK being 100 Mhz)
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xD0000000
(--) SIS(0): MMIO registers at 0xDD000000 (size 128K)
(--) SIS(0): VideoRAM: 8192 KB
(II) SIS(0): Using 7676K of framebuffer memory
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0): CRT1 gamma correction is enabled
(--) SIS(0): Memory bandwidth at 32 bpp is 200.452 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) SIS(0): CRT1 DDC probing failed
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 8192 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 630
(II) SIS(0): VESA VBE OEM Product Rev: 1.07.54
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level none
(II) SIS(0): VESA VBE DDC transfer in appr. 0 sec.
(II) SIS(0): VESA VBE DDC read failed
(==) SIS(0): Min pixel clock is 12 MHz
(--) SIS(0): Max pixel clock is 139 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Generic Monitor: Using hsync range of 30.00-60.00 kHz
(II) SIS(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
(II) SIS(0): Clock range:  12.00 to 139.09 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) SIS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1360x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (width too large for virtual size)
(II) SIS(0): Not using default mode "1360x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1152x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x600" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x576" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x576" (width too large for virtual size)
(II) SIS(0): Not using default mode "856x480" (width too large for virtual size)
(II) SIS(0): Not using default mode "848x480" (width too large for virtual size)
(--) SIS(0): Virtual size is 800x600 (pitch 800)
(**) SIS(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"   49.52  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) SIS(0):  Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(II) SIS(0): Modeline "800x600"   50.11  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) SIS(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"   39.97  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) SIS(0):  Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600"   36.06  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) SIS(0):  Default mode "768x576": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "768x576"   36.06  768 824 896 1024  576 601 603 625 +hsync +vsync
(**) SIS(0):  Default mode "720x576": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "720x576"   36.06  720 824 896 1024  576 601 603 625 +hsync +vsync
(**) SIS(0):  Default mode "800x480": 49.5 MHz, 46.9 kHz, 75.1 Hz
(II) SIS(0): Modeline "800x480"   49.52  800 816 896 1056  480 551 554 624 +hsync +vsync
(**) SIS(0):  Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480"   39.77  800 840 968 1056  480 552 556 628 +hsync +vsync
(**) SIS(0):  Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480"   28.28  720 728 840 896  480 490 492 517 -hsync -vsync
(**) SIS(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) SIS(0):  Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480"   25.06  640 656 752 800  480 490 492 525 -hsync -vsync
(**) SIS(0):  Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400"   25.06  640 656 752 792  400 413 415 442 -hsync +vsync
(**) SIS(0):  Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "512x384"   32.57  512 528 592 672  384 385 388 403 doublescan -hsync -vsync
(**) SIS(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"   19.98  400 416 480 528  300 300 302 314 doublescan +hsync +vsync
(**) SIS(0):  Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240"   12.53  320 328 376 400  240 245 246 258 doublescan -hsync -vsync
(**) SIS(0):  Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200"   12.53  320 328 376 400  200 206 207 221 doublescan -hsync +vsync
(++) SIS(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.3.0.1, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xdd000000 - 0xdd01ffff (0x20000) MX
        [1] 0   0       0xd0000000 - 0xd7ffffff (0x8000000) MX
        [2] -1  0       0xffe00000 - 0xffffffff (0x200000) MX(B)
        [3] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [4] -1  0       0x000f0000 - 0x000fffff (0x10000) MX
        [5] -1  0       0x000c0000 - 0x000effff (0x30000) MX
        [6] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX
        [7] -1  0       0xdd100000 - 0xdd100fff (0x1000) MX
        [8] -1  0       0xdd102000 - 0xdd102fff (0x1000) MX
        [9] -1  0       0xdd101000 - 0xdd101fff (0x1000) MX
        [10] -1 0       0xd8000000 - 0xd7ffffff (0x0) MXO
        [11] -1 0       0xdd000000 - 0xdd01ffff (0x20000) MX(B)
        [12] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX(B)
        [13] 0  0       0x000a0000 - 0x000affff (0x10000) MS(OprU)
        [14] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
        [15] 0  0       0x000b8000 - 0x000bffff (0x8000) MS(OprU)
        [16] 0  0       0x0000d000 - 0x0000d07f (0x80) IX
        [17] -1 0       0x0000ffff - 0x0000ffff (0x1) IX
        [18] -1 0       0x00000000 - 0x000000ff (0x100) IX
        [19] -1 0       0x0000ec00 - 0x0000ec3f (0x40) IX
        [20] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX
        [21] -1 0       0x0000e400 - 0x0000e41f (0x20) IX
        [22] -1 0       0x0000e000 - 0x0000e0ff (0x100) IX
        [23] -1 0       0x00004000 - 0x0000400f (0x10) IX
        [24] -1 0       0x0000d000 - 0x0000d07f (0x80) IX(B)
        [25] 0  0       0x000003b0 - 0x000003bb (0xc) IS
        [26] 0  0       0x000003c0 - 0x000003df (0x20) IS
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 8192 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 630
(II) SIS(0): VESA VBE OEM Product Rev: 1.07.54
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->IOOffset is 0xcc80
(II) SIS(0): Setting standard mode 0x63
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) SIS(0): [drm] loaded kernel module for "sis" driver
(II) SIS(0): [drm] created "sis" driver at busid "CI:1:0:0"
(II) SIS(0): [drm] added 8192 byte SAREA at 0xc4957000
(II) SIS(0): [drm] mapped SAREA 0xc4957000 to 0x40018000
(II) SIS(0): [drm] framebuffer handle = 0xd0000000
(II) SIS(0): [drm] added 1 reserved context for kernel
(II) SIS(0): [drm] Registers = 0xdd000000
(II) SIS(0): [drm] AGP enabled
(II) SIS(0): [drm] Allocated 8MB AGP memory
(II) SIS(0): [drm] Bound 8MB AGP memory
(II) SIS(0): [drm] Failed to add IRQ 12 handler, stereo disabled
(II) SIS(0): [dri] Visual configs initialized.
(II) SIS(0): Frame Buffer From (0,0) To (800,2454)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Dashed Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                13 256x256 slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): X context handle = 0x00000001
(II) SIS(0): [drm] installed DRM signal handler
(II) SIS(0): [DRI] installation complete
(II) SIS(0): Direct rendering enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "rotocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
        No such device.
(EE) Configured Mouse: cannot open input device
(EE) PreInit failed for input device "Configured Mouse"
(II) UnloadModule: "mouse"
(WW) No core pointer registered
No core pointer

Fatal server error:
failed to initialize core devices

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

(II) SIS(0): Restoring by setting old mode 0x03
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-9-27 14:00:51 | 显示全部楼层
鼠标是串口鼠标
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表