高手来帮忙,谢谢了

kite118

SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS630 ATA 66 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddMA
hda: ST320413A, ATA DISK drive
blk: queue c040cfc0, I/O limit 4095Mb (mask 0xffffffff)
hdc: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=2434/255/63, UDMA(66)
Partition check:
hda:<4>hda: dma_timer_expiry: dma status == 0x61
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }

hda1 hda2 hda3 hda4 <<4>hda: dma_timer_expiry: dma status == 0x61
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }

hda5 >
hda: dma_timer_expiry: dma status == 0x61
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }

ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 95k freed
VFS: Mounted root (ext2 filesystem).
hda: dma_timer_expiry: dma status == 0x61
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }

这是fedroa core 1.0安装和启动时的错误信息.
"partition check"要停留很长一段时间,严重影响启动速度.
那位大虾帮忙解决了.我感激你一辈子.
还装过magic linux 1.1 final,red hat 8.0都是在"partition check""hda:"以后停住,硬盘等一直亮着,无法进行安装.
装mandrake 8.0时,出现跟上面相似的情况.
光盘安装不行,我换硬盘;这个系统不行,我换那个.可换来换去总不是办法,是不是我机器有问题?
希望高手务必帮忙,先谢谢了.

sunmoon1997

看看bios有没有设置错误的地方．．