|
|
debian:/etc/mplayer# mplayer mms://61.185.214.171:8080
MPlayer 1.0pre3-3.3.3 (C) 2000-2003 MPlayer Team
CPU: Intel Pentium 4/Xeon Willamette 1496 MHz (Family: 8, Stepping: 10)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没有那个文件或目录
Reading /etc/mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (7649 chars)
Using Linux hardware RTC timing (1024Hz).
Input config file /root/.mplayer/input.conf parsed: 53 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : 没有那个设备
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: 拒绝连接
Failed to open LIRC support.
You will not be able to use your remote control.
Playing mms://61.185.214.171:8080.
Connecting to server 61.185.214.171[61.185.214.171]:8080 ...
Stream bitrate properties object
Max bandwidth set to 2147483647
stream count=[0x1][1]
stream id=[0x1][1]
max bitrate=[0x7f58][32600]
Connecting to server 61.185.214.171[61.185.214.171]:8080 ...
Cache size set to 4096 KBytes
Connected to server: 61.185.214.171
Cache fill: 3.71% (155648 bytes)
MPlayer interrupted by signal 2 in module: enable_cache
debian:/etc/mplayer# mplayer mms://61.185.214.171:8080
MPlayer 1.0pre3-3.3.3 (C) 2000-2003 MPlayer Team
CPU: Intel Pentium 4/Xeon Willamette 1496 MHz (Family: 8, Stepping: 10)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没有那个文件或目录
Reading /etc/mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (7649 chars)
Using Linux hardware RTC timing (1024Hz).
Input config file /root/.mplayer/input.conf parsed: 53 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : 没有那个设备
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: 拒绝连接
Failed to open LIRC support.
You will not be able to use your remote control.
Playing mms://61.185.214.171:8080.
Connecting to server 61.185.214.171[61.185.214.171]:8080 ...
Stream bitrate properties object
Max bandwidth set to 2147483647
stream count=[0x1][1]
stream id=[0x1][1]
max bitrate=[0x7f58][32600]
Connecting to server 61.185.214.171[61.185.214.171]:8080 ...
Cache size set to 4096 KBytes
Connected to server: 61.185.214.171
Cache fill: 3.32% (139264 bytes)
MPlayer interrupted by signal 2 in module: enable_cache
debian:/etc/mplayer# vi mplayer.conf
debian:/etc/mplayer# mplayer mms://61.185.214.171:8080
MPlayer 1.0pre3-3.3.3 (C) 2000-2003 MPlayer Team
CPU: Intel Pentium 4/Xeon Willamette 1496 MHz (Family: 8, Stepping: 10)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE2 supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没有那个文件或目录
Reading /etc/mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (7649 chars)
Using Linux hardware RTC timing (1024Hz).
Input config file /root/.mplayer/input.conf parsed: 53 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : 没有那个设备
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: 拒绝连接
Failed to open LIRC support.
You will not be able to use your remote control.
Playing mms://61.185.214.171:8080.
Connecting to server 61.185.214.171[61.185.214.171]:8080 ...
Stream bitrate properties object
Max bandwidth set to 2147483647
stream count=[0x1][1]
stream id=[0x1][1]
max bitrate=[0x7f58][32600]
Connecting to server 61.185.214.171[61.185.214.171]:8080 ...
Cache size set to 1024 KBytes
Connected to server: 61.185.214.171
Cache fill: 19.53% (204800 bytes) ASF file format detected.
============ ASF Stream group == START ===
object size = 32
stream count=[0x1][1]
stream id=[0x1][1]
max bitrate=[0x7f58][32600]
============ ASF Stream group == END ===
Clip info:
NFQme: 夡P
NFQthor: 夡P
NFQpyright: 夡P
NFQmments: 夡P
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 32000 Hz, 2 ch, 16 bit (0x10), ratio: 4000->128000 (32.0 kbit)
Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg))
==========================================================================
Checking audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 32000 hz, little endian signed int
AF_pre: 32000Hz 2ch Signed 16-bit (Little-Endian)
SDL: Samplerate: 32000Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
SDL: Unable to open audio: No available audio device
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
Exiting... (End of file) |
|
IP卡
狗仔卡
发表于 2004-2-14 19:47:16
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2004-2-20 08:08:01
楼主