为什么我的82845G显卡安装Xfree86-4.3不能使用呢?

Ghost_Vale

我在选择完心片后提示如下
"You normally does not need to fill this field if you have only one video card: "

我该在那里输入什么东西呀?


当我输入startx后出现如下错误.

你先看看显存是多少？少于8M的话，先到INTEL的
网站更新一下VGABIOS，然后更新XFree86 到4.3.0 版本。
http://www.freebsdchina.org/foru ... &highlight=845G

IEServer# startx
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority


XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.8 i386 [ELF]
Build Date: 23 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 29 00:00:19 2003
(==) Using config file: "/etc/X11/XF86Config"
(EE) Unable to find a core pointer device
(EE) Unable to determine the screen layout
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

giving up.
xinit: Broken pipe (errno 32): unable to connect to X server
xinit: No such process (errno 3): unexpected signal 13.

配置文件如下我的显卡只能分8M显存是不是和这个有关系呢?

IEServer#vi XF86Config.new
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "rotocol" "auto"
Option "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
#DisplaySize 300 230 # mm
Identifier "Monitor0"
VendorName "FZC"
ModelName "FOUNDER CM765"
Option "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" #
#Option "CacheLines" #
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" #
Identifier "Card0"
Driver "i810"
VendorName "Intel Corp."
BoardName "82845G/GL [Brookdale-G] Chipset Integrated Graphics Device"
BusID "CI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection

Ghost_Vale

谢谢各位的帮组现在我一经在freebsd上面给你们回贴了。
具体步骤等我整理后在贴上来
在此我中心的感谢这几天帮组过我的朋友。