无线上网 USB 连接不上

coolone

tr73的。
已经装上了驱动。

wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf

1. 
   
2. 
   
3. ioctl[SIOCSIWAUTH]: Operation not supported
   
4. WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported
   
5. ioctl[SIOCSIWENCODEEXT]: Operation not supported
   
6. ioctl[SIOCSIWENCODEEXT]: Operation not supported
   
7. ioctl[SIOCSIWENCODEEXT]: Operation not supported
   
8. ioctl[SIOCSIWAUTH]: Operation not supported
   
9. WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
   
10. WEXT auth param 5 value 0x1 - ctrl_iface exists and seems to be in use - cannot override it
    
11. Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
    
12. Failed to initialize control interface '/var/run/wpa_supplicant'.
    
13. You may have another wpa_supplicant process already running or the file was
    
14. left by an unclean termination of wpa_supplicant in which case you will need
    
15. to manually remove this file before starting wpa_supplicant again.
    
16. 
    
17. ioctl[SIOCSIWAUTH]: Operation not supported
    
18. WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
    
19. ioctl[SIOCSIWAUTH]: Operation not supported
    
20. WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
    
21. WEXT auth param 4 value 0x0 - Segmentation fault

复制代码

1. * Stopping wlan0
   
2. *   Bringing down wlan0
   
3. *     Shutting down wlan0 ...                                            [ ok ]
   
4. *     Stopping wpa_cli on wlan0 ...                                      [ ok ]
   
5. *     Stopping wpa_supplicant on wlan0 ...                               [ ok ]
   
6. * Starting wlan0
   
7. *   Starting wpa_supplicant on wlan0 ...
   
8. ioctl[SIOCSIWAUTH]: Operation not supported
   
9. WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported
   
10. ioctl[SIOCSIWENCODEEXT]: Operation not supported
    
11. ioctl[SIOCSIWENCODEEXT]: Operation not supported
    
12. ioctl[SIOCSIWENCODEEXT]: Operation not supported
    
13. ioctl[SIOCSIWAUTH]: Operation not supported
    
14. WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported        [ ok ]th param 5 value 0x1 -
    
15. *   Starting wpa_cli on wlan0 ...                                        [ ok ]
    
16. *     Backgrounding ...
    

复制代码

请指点一二，非常感谢

acevery

好像是 wext不支持你的驱动，试试 -Datmel 看.