在10.2下安装nVidia显卡的驱动 “1) Kernel sources must be installed and configu

wildoxlee

根据官方网站的指示：（附件中有完整的文件 这里只摘抄我用的那部分）
  openSUSE 10.2-IA32
It is recommended to use YaST for installation of the NVIDIA
driver. There are several reasons for this. First, it's
simple. Second, and this is the most important one, you won't need to
recompile the nvidia kernel module after a kernel update.

Update your Kernel via YOU (YaST Online Update). Use

  YaST -> Software -> Change installation Source -> Add

  Protocol: HTTP
  Server Name: : download.nvidia.com
  Directory on Server: /opensuse/10.2

to add the NVIDIA ftp server as additional installation source.
Now use

  YaST -> Software -> Install and Delete Software

to install the NVIDIA driver. Select the following packages:

  x11-video-nvidia
  nvidia-gfx-kmp-"kernel-flavor"

"kernel-flavor" depends on your installed kernel. Check with
"uname -r" for installed default/smp/bigsmp kernel. Use "sax2 -r"
for X.Org configuration.

People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YaST and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.

2) Use the nvidia installer for 1.0-9746.

sh NVIDIA-Linux-x86-1.0-9746-pkg1.run -q

3) Configure X.Org with

sax2 -r -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
      enabled, when the nvidia driver is running.

IMPORTANT: You need to recompile and install the nvidia kernel module
           after each kernel update.

sh NVIDIA-Linux-x86-1.0-9746-pkg1.run -K

我已经添加好安装源了 可是在安装的时候有一个很无奈的问题 安装文件根本下载不下来 老是超时 发现在suse下面上网、下载的速度很慢啊  该怎么办？？？？

——————————————————————————————————————————
以上问题已经解决 我用了一个的很笨的办法 我在windwos下用迅雷把http://download.nvidia.com/opens ... �己的硬盘上了 然后把这个目录设定成安装源就能完成内核部分的安装

另一个问题：1) Kernel sources must be installed and configured. 这一步该怎么作阿 ？


PS： 我已经安装过程中所用的文件打包，可是有30MB大，好像不能上传。对于想和我用用同样方法的朋友 ，提一个醒哦，下载的文件请一定放在Linux分区，目录名中千万不要有空格，否则可能提示找不到文件或目录。。。。。

qqdao

直接下载安装文件升级驱动，不要用yast，我发现用yast安装不成功，我就是直接安装的，安装的时候说没有我显卡对应的模块，程序自动编译了一个模块。我昨天刚刚搞成功的
。

wildoxlee

Post by qqdao
直接下载安装文件升级驱动，不要用yast，我发现用yast安装不成功，我就是直接安装的，安装的时候说没有我显卡对应的模块，程序自动编译了一个模块。我昨天刚刚搞成功的
。

能不能详细说下你的过程阿。。。你说的那个文件升级驱动的文件名是不是NVIDIA-Linux-x86-1.0-9755-pkg1.run