装好了nvidia显卡驱动的贴下你们的XF86config文件好吗？

bount

机器硬件C4 1.7G,512DDR,GeForce 4 MX 440 with AGP8X, 装的是SuSE 9.2 pro
先装了kernel source后
切换到另一终端输入init 3
然后sh NVIDIA-Linux-x86-1.0-6629-pkg1.run
然后安装，accept没啥问题，后面就郁闷了
再运行sax2 -m o=nvidia后就提示不成功了，
进XF86config里面吧nv改为nvidia再startx但是启动不了Xwindows,改回nv就又可以启动了。

还有就是分辨率总是没有1024*768的选项，挺郁闷的……
现在的桌面范围比电脑的屏幕大，搞得现在的桌面还可以四处移动一点范围……


麻烦装好了nvidia显卡驱动的大虾把你的XF86config文件给贴几份上来俺对照对照吧（怕是那里Load什么俺给删掉/没取消）

addone

是最新的驱动啊？没装过。只用Yast装了旧版的驱动。
1024*768，85Hz，打开了3D加速。用Sax2配的。
[PHP]
# /.../
# SaX generated XFree86 config file
# Created on: 2004-09-21T11:47:14+0800.
#
# Version: 4.8
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [SaX2] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
    FontPath         "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/local"
    FontPath         "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath         "/usr/X11R6/lib/X11/fonts/URW"
    FontPath         "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath         "/usr/X11R6/lib/X11/fonts/truetype"
    FontPath         "/usr/X11R6/lib/X11/fonts/uni:unscaled"
    FontPath         "/usr/X11R6/lib/X11/fonts/CID"
    FontPath         "/opt/kde3/share/fonts"
    FontPath         "/usr/local/share/fonts"
    FontPath         "/usr/X11R6/lib/X11/fonts"
    FontPath         "/usr/local/share/fonts/truetype"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "speedo"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
EndSection

Section "InputDevice"
  Driver       "Keyboard"
  Identifier   "Keyboard[0]"
  Option       "rotocol" "Standard"
  Option       "XkbLayout" "us"
  Option       "XkbModel" "pc104"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "5"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "Autodetection"
  Option       "rotocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[3]"
  Option       "Device" "/dev/input/mice"
  Option       "Emulate3Buttons" "on"
  Option       "Name" "Autodetection"
  Option       "rotocol" "explorerps/2"
  Option       "Vendor" "Sysp"
EndSection


Section "Monitor"
  DisplaySize  280 210
  HorizSync    31-68
  Identifier   "Monitor[0]"
  ModelName    "1024X768@85HZ"
  Option       "DPMS"
  VendorName   "--> VESA"
  VertRefresh  50-85
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
  Modeline         "1024x768" 79.52 1024 1080 1192 1360 768 769 772 801
  Modeline         "1024x768" 92.05 1024 1088 1200 1376 768 769 772 806
  Modeline         "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  Modeline         "800x600" 47.53 800 840 920 1040 600 601 604 626
  Modeline         "800x600" 55.22 800 840 928 1056 600 601 604 630
  Modeline         "640x480" 29.84 640 664 728 816 480 481 484 501
  Modeline         "640x480" 34.80 640 672 736 832 480 481 484 504
EndSection


Section "Device"
  BoardName    "GeForce4 MX440SE"
  BusID        "1:0:0"
  Driver       "nvidia"
  Identifier   "Device[0]"
  VendorName   "NVidia"
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1024x768" "800x600" "640x480"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  InputDevice  "Mouse[3]" "SendCoreEvents"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection
[/PHP]

bount

已经安装了nvidia显卡驱动
改XF86config里面的nv为nvidia后还是启动不了X

发现原来是虽然装了驱动但是还是加载不了nvidia模块
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
Hellokitty:~ # modprobe nvidia
FATAL: Could not open '/lib/modules/2.6.8-24-default/kernel/drivers/video/nvidia.ko': No such file or directory
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
这下可真够汗的，装的是6111的驱动，显卡和你一样也是GeForce 4 MX 440的

能不能把你的nvidia.ko这个文件附件一个上来好吗？

或者email我好吗?   zhouzhenwu@people.com.cn

先谢谢啦！