那位大哥可以帮我改改我的内核文件，谢谢

yvoonekit

我的机器配置是
主板：865PE
cpu:2.4C
显卡：GF 4 MX 440 AGP8X
网卡1：intel 100M(板载）
网卡2：8139
声卡：ALC655（板载）
我装的是FreeBSD 4.8那位大哥可以帮我改改我的内核文件，谢谢
代码:

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US ... lconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.51.2.2 2003/03/25 23:35:15 jhb Exp $

machine      i386
cpu      I386_CPU
cpu      I486_CPU
cpu      I586_CPU
cpu      I686_CPU
ident      GENERIC
maxusers   0

#makeoptions   DEBUG=-g      #Build kernel with gdb(1) debug symbols

options    MATH_EMULATE      #Support for x87 emulation
options    INET         #InterNETworking
options    INET6         #IPv6 communications protocols
options    FFS         #Berkeley Fast Filesystem
options    FFS_ROOT      #FFS usable as root device [keep this!]
options    SOFTUPDATES      #Enable FFS soft updates support
options    UFS_DIRHASH      #Improve performance on big directories
options    MFS         #Memory Filesystem
options    MD_ROOT         #MD is a potential root device
options    NFS         #Network Filesystem
options    NFS_ROOT      #NFS usable as root device, NFS required
options    MSDOSFS         #MSDOS Filesystem
options    CD9660         #ISO 9660 Filesystem
options    CD9660_ROOT      #CD-ROM usable as root, CD9660 required
options    PROCFS         #Process filesystem
options    COMPAT_43      #Compatible with BSD 4.3 [KEEP THIS!]
options    SCSI_DELAY=15000   #Delay (in ms) before probing SCSI
options    UCONSOLE      #Allow users to grab the console
options    USERCONFIG      #boot -c editor
options    VISUAL_USERCONFIG   #visual boot -c editor
options    KTRACE         #ktrace(1) support
options    SYSVSHM         #SYSV-style shared memory
options    SYSVMSG         #SYSV-style message queues
options    SYSVSEM         #SYSV-style semaphores
options    P1003_1B      #Posix P1003_1B real-time extensions
options    _KPOSIX_PRIORITY_SCHEDULING
options    ICMP_BANDLIM      #Rate limit bad replies
options    KBD_INSTALL_CDEV   # install a CDEV entry in /dev
options    AHC_REG_PRETTY_PRINT   # Print register bitfields in debug
               # output.  Adds ~128k to driver.
options    AHD_REG_PRETTY_PRINT   # Print register bitfields in debug
               # output.  Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options    SMP         # Symmetric MultiProcessor Kernel
#options    APIC_IO         # Symmetric (APIC) I/O

# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options    HTT         # HyperThreading Technology

device      isa
device      eisa
device      pci

# Floppy drives
device      fdc0   at isa? port IO_FD1 irq 6 drq 2
device      fd0   at fdc0 drive 0
device      fd1   at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device      fdc0

# ATA and ATAPI devices
device      ata0   at isa? port IO_WD1 irq 14
device      ata1   at isa? port IO_WD2 irq 15
device      ata
device      atadisk         # ATA disk drives
device      atapicd         # ATAPI CDROM drives
device      atapifd         # ATAPI floppy drives
device      atapist         # ATAPI tape drives
options    ATA_STATIC_ID      #Static device numbering

# SCSI Controllers
device      ahb      # EISA AHA1742 family
device      ahc      # AHA2940 and onboard AIC7xxx devices
device      ahd      # AHA39320/29320 and onboard AIC79xx devices
device      amd      # AMD 53C974 (Tekram DC-390(T))
device      isp      # Qlogic family
device      mpt      # LSI-Logic MPT/Fusion
device      ncr      # NCR/Symbios Logic
device      sym      # NCR/Symbios Logic (newer chipsets)
options    SYM_SETUP_LP_PROBE_MAP=0x40
            # Allow ncr to attach legacy NCR devices when
            # both sym and ncr are configured

device      adv0   at isa?
device      adw
device      bt0   at isa?
device      aha0   at isa?
device      aic0   at isa?

device      ncv      # NCR 53C500
device      nsp      # Workbit Ninja SCSI-3
device      stg      # TMC 18C30/18C50

# SCSI peripherals
device      scbus      # SCSI bus (required)
device      da      # Direct Access (disks)
device      sa      # Sequential Access (tape etc)
device      cd      # CD
device      pass      # Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
device      asr      # DPT SmartRAID V, VI and Adaptec SCSI RAID
device      dpt      # DPT Smartcache - See LINT for options!
device      iir      # Intel Integrated RAID
device      mly      # Mylex AcceleRAID/eXtremeRAID
device      ciss      # Compaq SmartRAID 5* series

# RAID controllers
device      aac      # Adaptec FSA RAID, Dell PERC2/PERC3
#device      aacp      # SCSI passthrough for aac (requires CAM)
device      ida      # Compaq Smart RAID
device      amr      # AMI MegaRAID
device      mlx      # Mylex DAC960 family
device      twe      # 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device      atkbdc0   at isa? port IO_KBD
device      atkbd0   at atkbdc? irq 1 flags 0x1
device      psm0   at atkbdc? irq 12

device      vga0   at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device      sc0   at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device      vt0   at isa?
#options    XSERVER         # support for X server on a vt console
#options    FAT_CURSOR      # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options    PCVT_SCANSET=2      # IBM keyboards are non-std

device      agp      # support several AGP chipsets

# Floating point support - do not disable.
device      npx0   at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device      apm0   at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
device      card
device      pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
device      pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device      sio0   at isa? port IO_COM1 flags 0x10 irq 4
device      sio1   at isa? port IO_COM2 irq 3
device      sio2   at isa? disable port IO_COM3 irq 5
device      sio3   at isa? disable port IO_COM4 irq 9

# Parallel port
device      ppc0   at isa? irq 7
device      ppbus      # Parallel port bus (required)
device      lpt      # Printer
device      plip      # TCP/IP over parallel
device      ppi      # Parallel port interface device
#device      vpo      # Requires scbus and da


# PCI Ethernet NICs.
device      de      # DEC/Intel DC21x4x (``Tulip'')
device      em      # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device      txp      # 3Com 3cR990 (``Typhoon'')
device      vx      # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device      miibus      # MII bus support
device      dc      # DEC/Intel 21143 and various workalikes
device      fxp      # Intel EtherExpress PRO/100B (82557, 82558)
device      pcn      # AMD Am79C97x PCI 10/100 NICs
device      rl      # RealTek 8129/8139
device      sf      # Adaptec AIC-6915 (``Starfire'')
device      sis      # Silicon Integrated Systems SiS 900/SiS 7016
device      ste      # Sundance ST201 (D-Link DFE-550TX)
device      tl      # Texas Instruments ThunderLAN
device      tx      # SMC EtherPower II (83c170 ``EPIC'')
device      vr      # VIA Rhine, Rhine II
device      wb      # Winbond W89C840F
device      xl      # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device      bge      # Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device      ed0   at isa? disable port 0x280 irq 10 iomem 0xd8000
device      ex
device      ep
device      fe0   at isa? disable port 0x300
# Xircom Ethernet
device      xe
# PRISM I IEEE 802.11b wireless NIC.
device      awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device      wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device      an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device      ie0   at isa? disable port 0x300 irq 10 iomem 0xd0000
#device      le0   at isa? disable port 0x300 irq 5 iomem 0xd0000
device      lnc0   at isa? disable port 0x280 irq 10 drq 0
device      cs0   at isa? disable port 0x300
device      sn0   at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop      # Network loopback
pseudo-device   ether      # Ethernet support
pseudo-device   sl   1   # Kernel SLIP
pseudo-device   ppp   1   # Kernel PPP
pseudo-device   tun      # Packet tunnel.
pseudo-device   pty      # Pseudo-ttys (telnet etc)
pseudo-device   md      # Memory "disks"
pseudo-device   gif      # IPv6 and IPv4 tunneling
pseudo-device   faith   1   # IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf      #Berkeley packet filter

# USB support
device      uhci      # UHCI PCI->USB interface
device      ohci      # OHCI PCI->USB interface
device      usb      # USB Bus (required)
device      ugen      # Generic
device      uhid      # "Human Interface Devices"
device      ukbd      # Keyboard
device      ulpt      # Printer
device      umass      # Disks/Mass storage - Requires scbus and da
device      ums      # Mouse
device      uscanner   # Scanners
device      urio      # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device      aue      # ADMtek USB ethernet
device      cue      # CATC USB ethernet
device      kue      # Kawasaki LSI USB ethernet

梦幻者言

呵呵。
把你的dmesg信息贴出来，再请大虾给你改吧

yvoonekit

dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 268369920 (262080K bytes)
avail memory = 255897600 (249900K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <CI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <CI to PCI bridge (vendor=8086 device=2571)> at device 1.0 on pci0
pci1: <CI bus> on pcib1
pci1: <NVidia model 0181 graphics accelerator> at 0.0 irq 9
uhci0: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 9 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 9 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 11 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 9 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 5
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <CI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xfb000000-0xfb0000ff irq 5 at device 1.0 on pci2
rl0: Ethernet address: 00:ca:00:02:80:72
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x8086, dev=0x1052) at 8.0 irq 11
isab0: <CI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xd0000-0xd7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <S/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <arallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <LIP network interface> on ppbus0
lpt0: <rinter> on ppbus0
lpt0: Interrupt-driven port
ppi0: <arallel I/O> on ppbus0
ad0: 76319MB <WDC WD800BB-00DKA0> [155061/16/63] at ata0-master BIOSDMA
acd0: CD-RW <SAMSUNG CDRW/DVD SM-348B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd9660: RockRidge Extension
cd9660: RockRidge Extension
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 3
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.42-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 268369920 (262080K bytes)
avail memory = 255897600 (249900K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2571)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0181 graphics accelerator> at 0.0 irq 9
uhci0: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 9 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 9 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 11 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 9 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 5
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xfb000000-0xfb0000ff irq 5 at device 1.0 on pci2
rl0: Ethernet address: 00:ca:00:02:80:72
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x8086, dev=0x1052) at 8.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xd0000-0xd7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 76319MB <WDC WD800BB-00DKA0> [155061/16/63] at ata0-master BIOSDMA
acd0: CD-RW <SAMSUNG CDRW/DVD SM-348B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
lp0: Too many errors, Going off-line.
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 7
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 268369920 (262080K bytes)
avail memory = 255897600 (249900K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2571)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0181 graphics accelerator> at 0.0 irq 9
uhci0: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 9 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 9 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 11 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 9 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 5
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xfb000000-0xfb0000ff irq 5 at device 1.0 on pci2
rl0: Ethernet address: 00:ca:00:02:80:72
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x8086, dev=0x1052) at 8.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xd0000-0xd7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 76319MB <WDC WD800BB-00DKA0> [155061/16/63] at ata0-master BIOSDMA
acd0: CD-RW <SAMSUNG CDRW/DVD SM-348B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
www#

jack_yyy

看<<handbook>>自己就可以搞定

夜猫子

这篇文章很值得楼主借鉴一下，只是借鉴，千万别照搬
http://www.freebsdchina.org/forum/viewtopic.php?t=1770