请问我的i810板载显卡是否安装对了？

duleell

我的主板是微星MS6317ver2.1(i810)
XFree86配置中我选了i810E
进入X(我装的是gnome),它能显示1024*768@16bit,但XFree86的log中有出错信息:
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error: 999)
drmOpenDevice: open result is -1, (Unknown error: 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error: 999)
drmOpenDevice: open result is -1, (Unknown error: 999)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i810"
(II) I810(0): [drm] drmOpen failed
(EE) I810(0): [dri] DRIScreenInit failed.  Disabling DRI.
(==) I810(0): Write-combining range (0xd5000000,0x80000) was already clear
(==) I810(0): Write-combining range (0xd0000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->IOOffset is 0x0000
(==) I810(0): Write-combining range (0xa0000,0x10000) was already clear
(II) I810(0): Setting dot clock to 75.0 MHz [ 0x17 0x6 0x20 ] [ 25 8 2 ]
(II) I810(0): chose watermark 0x2210e000: (tab.freq 75.0)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
        (Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00800000 (pgoffset 2048)
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                24 128x128 slots
                6 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(==) I810(0): Direct rendering disabled
(==) RandR enabled

duleell

后来：
修改/boot/loader.conf：agp_load="YES"
重启机器，然后：
# cd /dev
# sh MAKEDEV agpgart
在XF86Config文件里，加载显卡驱动 Driver "i810" 的下面加入：
Optione "NoDDC"

问题依旧.

duleell

有没可能我的主板芯片组不是i810E?

kevinlei

应该不是硬件问题，所有810都是同一种显卡的

waveDuke

哈啊哈，和我的情况一样，我也没解决。但是我决定不用X了，好好学习命令行

duleell

我的能用X,而且显示效果跟linux下的一样.就是不知道3D支持怎样?

waveDuke

哈，我的只有三种颜色，反正，我看到的只用黑，白，篮三种

linux下就很正常

duleell

同情.

waveDuke

菜鸟菜鸟，我刚入门的，以后就不是了，哈

volcano027

为什么我的没问题啊！
freebsd5.1