|
|
以前编译FREEBSD4.8内核，出现错误
现在编译FREEBSD5.1内核，也出现错误
我可是看了FREEBSD技术内幕，FREEBSD用户手册以及若干编译内核的帖子啊，还是没结果，好失败，好伤心
如今出现以下的编译错误，高手指点一下啊。
我的机器配置如下:联想D-LINK DFE-530TX网卡，AMD雷鸟1G，IBM40G 高速硬盘，我的修改后的内核文件内容如下：
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US ... lconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.384.2.2 2003/05/31 15:18:41 scottl Exp $
machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident TAHAOMEI
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
#options MD_ROOT #MD is a potential root device
#options NFSCLIENT #Network Filesystem Client
#options NFSSERVER #Network Filesystem Server
#options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
#options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
#options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
# SCSI peripherals
#device scbus # SCSI bus (required)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device amr # AMI MegaRAID
#device ida # Compaq Smart RAID
#device ips # IBM (Adaptec) ServeRAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
#device sio # 8250, 16[45]50 based serial ports
# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570xx Gigabit Ethernet
# ISA Ethernet NICs. pccard nics included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of ethernet chips
#device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
#device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device axe # ASIX Electronics USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
========================================================
结果编译的时候出现如下的错误提示：
awk -f /usr/src/sys/tools/vnode_if.awk /usr/src/sys/kern/vnode_if.src -c
cc -c -O -pipe -mcpu=pentiumpro -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/dev -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -fno-common -mno-align-long-strings -mpreferred-stack-boundary=2 -ffreestanding -Werror vnode_if.c
touch hack.c
cc -shared -nostdlib hack.c -o hack.So
rm -f hack.c
sh /usr/src/sys/conf/newvers.sh TAHAOMEI
cc -c -O -pipe -mcpu=pentiumpro -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/dev -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -fno-common -mno-align-long-strings -mpreferred-stack-boundary=2 -ffreestanding -Werror vers.c
linking kernel
sbp.o: In function `sbp_probe_target':
sbp.o(.text+0x919): undefined reference to `xpt_freeze_devq'
sbp.o(.text+0xa0f): undefined reference to `xpt_freeze_devq'
sbp.o: In function `sbp_cam_scan_lun':
sbp.o(.text+0xf78): undefined reference to `xpt_setup_ccb'
sbp.o(.text+0xf83): undefined reference to `xpt_action'
sbp.o(.text+0xf9d): undefined reference to `xpt_release_devq'
sbp.o: In function `sbp_cam_scan_target':
sbp.o(.text+0x1053): undefined reference to `xpt_setup_ccb'
sbp.o(.text+0x107a): undefined reference to `xpt_action'
sbp.o(.text+0x1094): undefined reference to `xpt_release_devq'
sbp.o: In function `sbp_do_attach':
sbp.o(.text+0x1133): undefined reference to `xpt_periph'
sbp.o(.text+0x1142): undefined reference to `xpt_create_path'
sbp.o: In function `sbp_agent_reset_callback':
sbp.o(.text+0x1251): undefined reference to `xpt_release_devq'
sbp.o: In function `sbp_orb_pointer':
sbp.o(.text+0x14fd): undefined reference to `xpt_done'
sbp.o: In function `sbp_recv1':
sbp.o(.text+0x2089): undefined reference to `xpt_freeze_devq'
sbp.o(.text+0x23ae): undefined reference to `xpt_done'
sbp.o: In function `sbp_attach':
sbp.o(.text+0x2518): undefined reference to `cam_simq_alloc'
sbp.o(.text+0x258c): undefined reference to `cam_sim_alloc'
sbp.o(.text+0x259b): undefined reference to `cam_simq_free'
sbp.o(.text+0x25b3): undefined reference to `xpt_bus_register'
sbp.o(.text+0x25da): undefined reference to `xpt_periph'
sbp.o(.text+0x25e9): undefined reference to `xpt_create_path'
sbp.o(.text+0x26d1): undefined reference to `cam_sim_free'
sbp.o: In function `sbp_detach':
sbp.o(.text+0x2835): undefined reference to `xpt_free_path'
sbp.o(.text+0x2843): undefined reference to `xpt_bus_deregister'
sbp.o: In function `sbp_cam_detach_target':
sbp.o(.text+0x2a96): undefined reference to `xpt_release_devq'
sbp.o(.text+0x2ab8): undefined reference to `xpt_async'
sbp.o(.text+0x2ac3): undefined reference to `xpt_free_path'
sbp.o: In function `sbp_target_reset':
sbp.o(.text+0x2b39): undefined reference to `xpt_freeze_devq'
sbp.o: In function `sbp_timeout':
sbp.o(.text+0x2ca1): undefined reference to `xpt_freeze_devq'
sbp.o: In function `sbp_action1':
sbp.o(.text+0x339b): undefined reference to `xpt_done'
sbp.o: In function `sbp_abort_ocb':
sbp.o(.text+0x3a20): undefined reference to `xpt_done'
*** Error code 1
Stop in /usr/obj/usr/src/sys/TAHAOMEI.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src. |
|
IP卡
狗仔卡
发表于 2003-7-17 20:32:12
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主