conky相关问题，刚升级后

Havanna

1. background no
   
2. override_utf8_locale yes
   
3. font DejaVu Sans:size=8
   
4. xftfont DejaVu Sans:size=8
   
5. #font DejaVu Sans:size=8
   
6. #xftfont DejaVu Sans:size=8
   
7. use_xft yes
   
8. xftalpha 0.6
   
9. 
   
10. update_interval 1.0
    
11. total_run_times 0
    
12. own_window yes
    
13. #own_window_type desktop
    
14. own_window_type normal
    
15. own_window_transparent yes
    
16. own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    
17. double_buffer yes
    
18. draw_shades no
    
19. draw_outline no
    
20. draw_borders no
    
21. draw_graph_borders no
    
22. #minimum_size 180 5
    
23. maximum_width 180
    
24. 
    
25. #alignment top_left
    
26. #alignment top_right
    
27. #alignment bottom_left
    
28. alignment bottom_right
    
29. #alignment none
    
30. gap_x 5
    
31. gap_y 25
    
32. no_buffers yes
    
33. cpu_avg_samples 2
    
34. override_utf8_locale yes
    
35. uppercase no # set to yes if you want all text to be in uppercase
    
36. use_spacer none
    
37. out_to_console no
    
38. 
    
39. 
    
40. default_color lightgrey
    
41. #default_color moccasin
    
42. default_shade_color black
    
43. default_outline_color grey70
    
44. 
    
45. 
    
46. 
    
47. TEXT
    
48. ${color gold}${font OpenLogos:size=48}A
    
49. ${voffset -70}${offset 60}${color moccasin}${font DejaVu Sans:size=22}${time %H:%M:%S}
    
50. ${voffset -15}${color}${font}${alignr}${time %A/%m.%d.%G}
    
51. ${color slate grey}$hr
    
52. ${color slate grey}${font}Time:${color}${alignr}$uptime
    
53. ${color slate grey}Kern:${color}${alignr}linux-$kernel-$machine
    
54. ${color slate grey}CPU:${color}${alignr}${cpu cpu1}% ${cpu cpu2}%  ${freq_g cpu}GHz ${acpitemp}℃
    
55. ${if_existing /proc/acpi/battery/BAT0/state yes}
    
56. ${color slate grey}${font}Battery:${color}${alignr}${battery_percent}%${endif}
    
57. ${color slate grey}Processes:${color}${alignr}$processes($running_processes running)
    
58. ${color slate grey}$stippled_hr
    
59. ${color slate grey}Highest CPU:$alignr -PID-  CPU%
    
60. ${color}${top name 1}$alignr${top pid 1}${top cpu 1}
    
61. ${color}${top name 2}$alignr${top pid 2}${top cpu 2}
    
62. ${color}${top name 3}$alignr${top pid 3}${top cpu 3}
    
63. ${color slate grey}$stippled_hr
    
64. ${color slate grey}Highest MEM:$alignr -PID-  MEM%
    
65. ${color}${top_mem name 1}$alignr${top_mem pid 1}${top_mem mem 1}
    
66. ${color}${top_mem name 2}$alignr${top_mem pid 2}${top_mem mem 2}
    
67. ${color}${top_mem name 3}$alignr${top_mem pid 3}${top_mem mem 3}
    
68. ${color slate grey}$hr
    
69. ${color slate grey}${font}MEM:$memperc%${color}$alignr$mem/$memmax
    
70. ${color}${membar 3,180}
    
71. ${color slate grey}SWAP:$swapperc%${color}$alignr$swap/$swapmax
    
72. ${color}${swapbar 3,180}
    
73. ${color slate grey}BOOT:${fs_used_perc /boot}%${color}$alignr${fs_used /boot}/${fs_size /boot}
    
74. ${color}${fs_bar 3,180 /boot}
    
75. ${color slate grey}ROOT:${fs_used_perc /}%${color}$alignr${fs_used /}/${fs_size /}
    
76. ${color}${fs_bar 3,180 /}
    
77. ${color slate grey}HOME:${fs_used_perc /home}%${color}$alignr${fs_used /home}/${fs_size /home}
    
78. ${color}${fs_bar 3,180 /home}
    
79. ${color slate grey}Disk Read:${color}${alignr}$diskio_read
    
80. ${color}${diskiograph_read /dev/sda 10,180}
    
81. ${color slate grey}Disk Write:${color}${alignr}$diskio_write
    
82. ${color}${diskiograph_write /dev/sda 10,180}${if_match "$mpd_status"!="Stopped"}
    
83. ${color slate grey}$hr
    
84. ${color slate grey}Music:${color}${alignr}Now ${mpd_status}
    
85. ${color slate grey}Title:${color lightgrey}${alignr}${mpd_title}
    
86. ${color slate grey}Artist:${color lightgrey}${alignr}${mpd_artist}
    
87. ${color slate grey}Time:${color}${alignr}${mpd_elapsed}/${mpd_length}
    
88. ${color slate grey}Volume:${color}${mpd_vol}%${color slate grey}${alignr}Bitrate:${color}${mpd_bitrate} kbps${endif}${if_existing /proc/net/route wlan0}
    
89. ${color slate grey}$hr
    
90. ${color slate grey}${font}Wireless:${color}${alignr}${addr wlan0}
    
91. ${color slate grey}Tot.up.${color}${alignr}${totalup wlan0}
    
92. ${color slate grey}Up:${color}${alignr}${upspeed wlan0}k/s
    
93. ${color}${upspeedgraph wlan0 10,180}
    
94. ${color slate grey}Tot.dow.${color}${alignr}${totaldown wlan0}
    
95. ${color slate grey}Down:${color}${alignr}${downspeed wlan0}k/s
    
96. ${color}${downspeedgraph wlan0 10,180}${else}${if_existing /proc/net/route ppp0}
    
97. ${color slate grey}$hr
    
98. ${color slate grey}${font}PPP0:${color}${alignr}${addr ppp0}
    
99. ${color slate grey}Tot.up.${color}${alignr}${totalup ppp0}
    
100. ${color slate grey}Up:${color}${alignr}${upspeed ppp0}k/s
     
101. ${color}${upspeedgraph ppp0 10,180}
     
102. ${color slate grey}Tot.dow.${color}${alignr}${totaldown ppp0}
     
103. ${color slate grey}Down:${color}${alignr}${downspeed ppp0}k/s
     
104. ${color}${downspeedgraph ppp0 10,180}${else}${if_existing /proc/net/route eth0}
     
105. ${color slate grey}$hr
     
106. ${color slate grey}${font}eth0:${color}${alignr}${addr eth0}
     
107. ${color slate grey}Tot.up.${color}${alignr}${totalup eth0}
     
108. ${color slate grey}Up:${color}${alignr}${upspeed eth0}k/s
     
109. ${color}${upspeedgraph eth0 10,180}
     
110. ${color slate grey}Tot.dow.${color}${alignr}${totaldown eth0}
     
111. ${color slate grey}Down:${color}${alignr}${downspeed eth0}k/s
     
112. ${color}${downspeedgraph eth0 10,180}${endif}${endif}${endif}
     
113. ${color slate grey}$hr
     
114. ${color slate grey}${font}Mail:${alignr}${color}You have ${color moccasin}${texeci 1800 perl ~/Sh/.check_gmail.sh} ${color}new mail(s)
     
115. ${voffset -55}

复制代码

其中的网络部分
不知为何，一直显示的是wlan0，而实际上我只使用了ppp0拨号
更新之前是没有问题的

Havanna

电池显示也不正常了
相关部分改成这样了

1. ${if_match ${battery_percent BAT0} > 0}
2. ${color slate grey}${font}Battery:${color}${alignr}${battery_percent}%${endif}

复制代码

嗯，插入电池后则显示电量

kamui0523

把文件里的wlan0字段全替换成ppp0

Havanna

Post by kamui0523;2080312
把文件里的wlan0字段全替换成ppp0

呃，那当仅有无线网络时候呢？
再改回来？
我的意思是先检测有无无线，如没有则再检测有无ppp拨号，如没有则显示eth0
实际上由于我的网络环境变更比较多，所以我一般也要检测有无eth0，因为rc.conf中本人并没设置eth0的IP或dhcp

adam8157

我这都是eth0+wlan0这样显示的...

lmguy

不透明了是咋回事呢

Havanna

shit ,没人玩 conky?
现在的网络显示也通过${if_match "${addr ppp0}"!="No Address"}来匹配显示了

Havanna

晕，有个更简单的参数
if_up           (interface)         if INTERFACE exists and is up, display everything between $if_up and the matching $endif
if_mpd_playing                    if mpd is playing or paused, display everything between $if_mpd_playing and the matching $endif