10.3里安装N卡驱动的正确流程谁指点下

seagodposeidon

suse 10.3里安装N卡驱动的正确流程谁指点下
我用的G桌面，N卡的驱动安的总是有问题。
我是新手，谁能给个详细点的安装过程？
小弟先谢过了。

masterdemon

http://www.suse.de/~sndirsch/nvidia-installer-HOWTO.html#1

It is recommended to use YaST for installation of the NVIDIA
driver. There are several reasons for this. First, it's
simple. Second, and this is the most important one, you won't need to
recompile the nvidia kernel module after a kernel update.

Update your Kernel via YOU (YaST Online Update). Use

  YaST -> Software -> Installation Source -> Add

  Protocol: HTTP
  Server Name: : download.nvidia.com
  Directory on Server: /opensuse/10.3

to add the NVIDIA ftp server as additional installation source.
Now use

  YaST -> Software -> Software Management

to install the NVIDIA driver. Select the following packages:

  x11-video-nvidiaG01
  nvidia-gfxG01-kmp-"kernel-flavor"

If you own one of the following NVIDIA graphics chips

  0x0110 GeForce2 MX/MX 400
  0x0111 GeForce2 MX 100/200
  0x0112 GeForce2 Go
  0x0113 Quadro2 MXR/EX/Go
  0x0170 GeForce4 MX 460
  0x0171 GeForce4 MX 440
  0x0172 GeForce4 MX 420
  0x0173 GeForce4 MX 440-SE
  0x0174 GeForce4 440 Go
  0x0175 GeForce4 420 Go
  0x0176 GeForce4 420 Go 32M
  0x0177 GeForce4 460 Go
  0x0178 Quadro4 550 XGL
  0x0179 GeForce4 440 Go 64M
  0x017A Quadro NVS
  0x017C Quadro4 500 GoGL
  0x017D GeForce4 410 Go 16M
  0x0181 GeForce4 MX 440 with AGP8X
  0x0182 GeForce4 MX 440SE with AGP8X
  0x0183 GeForce4 MX 420 with AGP8X
  0x0185 GeForce4 MX 4000
  0x0188 Quadro4 580 XGL
  0x018A Quadro NVS 280 SD
  0x018B Quadro4 380 XGL
  0x018C Quadro NVS 50 PCI
  0x01A0 GeForce2 Integrated GPU
  0x01F0 GeForce4 MX Integrated GPU
  0x0200 GeForce3
  0x0201 GeForce3 Ti 200
  0x0202 GeForce3 Ti 500
  0x0203 Quadro DCC
  0x0250 GeForce4 Ti 4600
  0x0251 GeForce4 Ti 4400
  0x0253 GeForce4 Ti 4200
  0x0258 Quadro4 900 XGL
  0x0259 Quadro4 750 XGL
  0x025B Quadro4 700 XGL
  0x0280 GeForce4 Ti 4800
  0x0281 GeForce4 Ti 4200 with AGP8X
  0x0282 GeForce4 Ti 4800 SE
  0x0286 GeForce4 4200 Go
  0x0288 Quadro4 980 XGL
  0x0289 Quadro4 780 XGL
  0x028C Quadro4 700 GoGL

select instead the packages:

  x11-video-nvidia
  nvidia-gfx-kmp-"kernel-flavor"

"kernel-flavor" depends on your installed kernel. Check with
"uname -r" for installed default/bigsmp kernel. Use "sax2 -r"
for X.Org configuration.

People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YaST and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.

2) Use the nvidia installer for 100.14.19.

sh NVIDIA-Linux-x86-100.14.19-pkg1.run -q

3) Configure X.Org with

sax2 -r -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
      enabled, when the nvidia driver is running.

IMPORTANT: You need to recompile and install the nvidia kernel module
           after each kernel update.

sh NVIDIA-Linux-x86-100.14.19-pkg1.run -K

seagodposeidon

请问，这个是不是也可以直接用en.opensuse.org/nvidia呀？

逍遥游510

可以，其实这个也是下的download.nvidia.com上的。

seagodposeidon

G桌面，系统崩溃了。。。。 是什么原因呀？
之前在kde下装驱动，然后开启3D加速，再开启xgl，然后用了一会儿就白屏了。
又是为什么呢？是我驱动装的有问题么？白屏后的解决办法是什么呀？