升级完系统后无法进入X

zeroo · 发表于 2006-11-23 20:49:15

执行
emerge -u system
etc-update

后X无法进入,,,
xorg错误提示如下,,请帮我看看,多谢...

(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: DRI module not loaded
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(EE) No Input driver matching `wacom'
(EE) No Input driver matching `wacom'
(EE) No Input driver matching `wacom'
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us+level3(ralt_switch)" };
xkb_geometry { include "pc(pc105)" };
(II) Configured Mouse: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

复制代码

Fleta · 发表于 2006-11-23 20:52:24

etc-update时可能把以前的xorg.conf给搞掉了。

ProgramFan · 发表于 2006-11-23 20:59:07

应该是相应的驱动没有emerge,最好 emerge -tauvDN world

zeroo · 发表于 2006-11-23 21:07:14

Post by Fleta
etc-update时可能把以前的xorg.conf给搞掉了。

没有,用的仍然是以前的xorg.conf

Post by ProgramFan
应该是相应的驱动没有emerge,最好 emerge -tauvDN world

这个是啥意思,升级系统的?还是...

zhllg · 发表于 2006-11-23 22:55:04

贴xorg.conf

zeroo · 发表于 2006-11-24 08:00:14

搞不清楚是不是xorg.conf的问题.我把.xinitrc删除后,用startx就可以进去了.不过没有任何桌面管理器......

晚些时候再贴上xorg.conf

按楼上那位兄弟的方面升级系统出来错误
emerge -tuvDN world

好象提示XML发现问题,回去后再贴上具体信息...

zeroo · 发表于 2006-11-24 18:55:38

xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "L1752S"
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nv"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "L1752S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

复制代码

另外emerge -tuvDN world错误提示如下

Calculating world dependencies ..... ..... done!
>>> Emerging (1 of 163) x11-misc/xkeyboard-config-0.9 to /
* xkeyboard-config-0.9.tar.bz2 MD5 ;-) ... [ ok ]
* xkeyboard-config-0.9.tar.bz2 RMD160 ;-) ... [ ok ]
* xkeyboard-config-0.9.tar.bz2 SHA1 ;-) ... [ ok ]
* xkeyboard-config-0.9.tar.bz2 SHA256 ;-) ... [ ok ]
* xkeyboard-config-0.9.tar.bz2 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking xkeyboard-config-0.9.tar.bz2 ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking xkeyboard-config-0.9.tar.bz2 to /var/tmp/portage/x11-misc/xkeyboard-config-0.9/work
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/x11-misc/xkeyboard-config-0.9/work/xkeyboard-config-0.9 ...
* econf: updating xkeyboard-config-0.9/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating xkeyboard-config-0.9/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --with-xkb-base=/usr/share/X11/xkb --enable-compat-rules --disable-xkbcomp-symlink --with-xkb-rules-symlink=xorg --build=i686-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for xkbcomp... /usr/bin/xkbcomp
checking for intltool >= 0.30... 0.33 found
checking for perl... /usr/bin/perl
checking for XML::Parser...
!!! Please attach the following file when filing a report to bugs.gentoo.org:
!!! /var/tmp/portage/x11-misc/xkeyboard-config-0.9/work/xkeyboard-config-0.9/config.log
configure:error:XML::parser perl module is required for intltool
ERROR: X11-misc/xkeyboard-config-0.9 failed
call stack:
ebuild.sh,line 1568:called dyn_complie
ebuild.sh,line 937:called src_complie
xkeyboard-config-0.9-ebuid,line 42:called econf '--with-xkb-bash=/usr/base/X11/xkb' '--enable-compat-rules' '--disable-xkbcomp-symlink' '--with-xkb-rules-symlink=xorg'
ebuild.sh,line 540:called die econf failed

复制代码

多谢大家了.

ProgramFan · 发表于 2006-11-24 21:16:17

看来你也应该是用livecd安装的吧，livecd安装的extra软件有很多的依赖问题

在/etc/make.conf：USE 里加入 perl 后再 emerge -tauvDN world 看看吧。
如果还有问题，可以 emerge --update perl 看下。系统应该先升perl才对。

zeroo · 发表于 2006-11-24 22:14:54

Post by ProgramFan
看来你也应该是用livecd安装的吧，livecd安装的extra软件有很多的依赖问题

在/etc/make.conf：USE 里加入 perl 后再 emerge -tauvDN world 看看吧。
如果还有问题，可以 emerge --update perl 看下。系统应该先升perl才对。

好象不是这样的哦...我用的stage3安装的...perl已经是最新版本的..另外..重新安装了perl还是不行啊...

x还是启动不了,系统升级还是不能完成..请大家帮忙...

ProgramFan · 发表于 2006-11-24 22:25:10

哎，这个我也没法，我是gentoo新手，现在正在emerge -tauvDN world 呢。

		自动登录	找回密码
密码			注册

升级完系统后无法进入X

浏览过的版块