mdk10刻录光盘安装出现问题！你们遇到过没有！

hhyyy9

下载了mdk10，刻录四张盘，放入第一张安装，但是进行到安装packages得时候老是提示error!我本想是不是要换盘，但是光盘右弹不出来！请问兄弟们遇到过这个问题否？！不知道怎么解决了，急死人了！～:mad:

hhyyy9

对了第一步好像是读入内存什么的也提示错误好像，但是可以继续进行下去！

fundawang

检查ISO的MD5是否正确，若不正确请重新下载，若正确请换用高质量光盘重新刻录。

hhyyy9

[PHP]md5sum:
ad3d50fe12c0672a7e4d32b466ab6851  Mandrakelinux10.0-Official-Download-CD1.i586.iso
a64fbcb98d6aa2cd4ac287e563593678  Mandrakelinux10.0-Official-Download-CD2.i586.iso
bf7a7dad80cf3f41453d572d3ffed09b  Mandrakelinux10.0-Official-Download-CD3.i586.iso
1a85f42a5d25a8336ddb45fa8e8c50a3  Mandrakelinux10.0-Official-Download-CD4.i586.iso

我的md5sum:
ad3d50fe12c0672a7e4d32b466ab6851  Mandrakelinux10.0-Official-Download-CD1.i586.iso
a64fbcb98d6aa2cd4ac287e563593678  Mandrakelinux10.0-Official-Download-CD2.i586.iso
bf7a7dad80cf3f41453d572d3ffed09b  Mandrakelinux10.0-Official-Download-CD3.i586.iso
1a85f42a5d25a8336ddb45fa8e8c50a3  Mandrakelinux10.0-Official-Download-CD4.i586.iso[/PHP]
完全正确的啊！～斑竹大人！

hhyyy9

我刚去特意把第一步读入内存时候的错误信息抄下来了！


Could not uncompress second stage of ram disk, this is probably to a hardware error while reading the data. This maybe caused by a hardware failure or Linux bug

fundawang

怀疑内存被超频，进入到CMOS设置把所有的优化参数都关掉。

hhyyy9

好的

hhyyy9

am trying to install Mandrake as second operating system as dual boot with windows XP , I am prompted with the following message



Could not uncompress second stage of ram disk, this is probably to a hardware error while reading the data. This maybe caused by a hardware failure or Linux bug



The PC is couple of days old, brand new,

PC specs as follow

Pentium 4

256 DDR Ram

NVIDIA graphics card 128 MB Ram

120 GB Seagate hard drive



I have also tried swapping the Ram with another, as well as the graphic card to no avail

Furthermore, I have tried the installation on another PC and I have received the same response as above.



Any advice tip or hint would be grateful; I am also totally new to Linux system.
－－－－－－－－－－－－－－－－－－－－－－－－
i heard it before on net..


i found a discussion about your problem;
it begins like ;
"
it boots to a 'welcome' screen and then says "could not uncompress second stage ramdisk".

there are still hardware bugs in the Kernel that is being used in Mandrake 8.1 (2.4.8-26mdk). It offered the solution of loading another boot img on floppy when you start the installation. This makes sence as I have installed about 15 different linux distributions on my PC so I know with some certainty that Linux runs with all my hadrware with previous kernel versions.

When I used my Phillips 4x4x24 CD-RW drive for installation I recieved the same error message you did, and when I used my slave CDRom drive (generic atapi drive) then I had no problems with the install.

If I were in your place I would try the following:
1. Use another boot img (you stated you could not get rawwrite to work)
2. Download an older release of Mandrake or another distrabution to see if that works (with your connection speed I would not attempt downloading another iso)
3. If you have another PC use the CD Rom drive from that PC until you get Mandrake installed.
"

for more info;

http://www.linuxquestions.org/qu ... /13/2003/05/2/12192

hhyyy9

汗～斑竹！我进入cmos重新读取默认设置，重启安装，问题依旧！～

fundawang

也有可能是光驱的问题，但我个人的经验是内存。当初装9.1的时候，死活就进不了图形界面，好像也是提示这个。后来我把CMOS里面的Top performance给disable掉，就没事了。